1stPlayer T3-4F1 white
 | Outdated Product A non-trivial snow-white mid-range case with optimized airflow, interesting backlighting and thoughtful layout. The model belongs to the Midi Tower form factor, but at the same time it is designed for the installation of compact micro-ATX motherboards. The beauty of the model lies in the fact that 4 case fans are already installed out of the box inside the case: one is hidden from above on the back wall, the other three hang on top of each other on the front panel. Thus, the user can significantly save on blowing the case, since 4 turntables are included in the price of the case. The front of the case is covered with a stylish ribbed panel with a patterned mesh in the center. The pre-installed fan blades are equipped with addressable LEDs that can be seen through the front mesh or through...the transparent side window. The case is made according to the traditional two-tier scheme, when on the lower tier there is a compartment for the power supply, 4 pockets for drives and 4 expansion slots. And the main part of the chassis is allocated for the installation of a motherboard, a video card (maximum length 320 mm) and a processor with a tower cooler up to 165 mm high. The presence of additional slots allows you to increase the capacity of the cooling system. In total, the case has 8 places for installing case fans and one zone for a liquid cooling system with a 240 mm long radiator. On the front panel there are several USB 2.0 and USB 3.2 gen1 ports, as well as a headphone output. Additionally, the case provides several dust filters and a window for quick replacement of the processor tower. |
 |
A non-trivial snow-white mid-range case with optimized airflow, interesting backlighting and thoughtful layout. The model belongs to the Midi Tower form factor, but at the same time it is designed for the installation of compact micro-ATX motherboards. The beauty of the model lies in the fact that 4 case fans are already installed out of the box inside the case: one is hidden from above on the back wall, the other three hang on top of each other on the front panel.
Thus, the user can significantly save on blowing the case, since 4 turntables are included in the price of the case. The front of the case is covered with a stylish ribbed panel with a patterned mesh in the center. The pre-installed fan blades are equipped with addressable LEDs that can be seen through the front mesh or through the transparent side window. The case is made according to the traditional two-tier scheme, when on the lower tier there is a compartment for the power supply, 4 pockets for drives and 4 expansion slots.
And the main part of the chassis is allocated for the installation of a motherboard, a video card (maximum length 320 mm) and a processor with a tower cooler up to 165 mm high. The presence of additional slots allows you to increase the capacity of the cooling system. In total, the case has 8 places for installing case fans and one zone for a liquid cooling system with a 240 mm long radiator. On the front panel there are several USB 2.0 and USB 3.2 gen1 ports, as well as a headphone output. Additionally, the case provides several dust filters and a window for quick replacement of the processor tower.
