Xiaomi Mi Air Purifier 2H

The second generation of the air purifier from the Chinese company Xiaomi has decreased in size by about one and a half times (from 735 mm to 520 mm in height). Nevertheless, it will still require a lot of space to install it, since it is desirable to leave at least 10-20 cm of free space on the sides of the device to ensure unhindered air intake by the device.

Easier nowhere

The principle of operation of the purifier is very simple: through special perforated holes on the front panel and on the sides of the case, dirty air is drawn in and enters the air filter. At the end of the cleaning procedure, the air is thrown back into the room by means of a fan at the top of the device. At the filtration stage, odours are removed from the air and pollutants with a size of about 2.5 microns (fine dust) are cut off.

Remote control

The degree of air pollution in the room is signaled by a light indicator on the front panel of the purifier. If it glows red, then the level of pollution is high, and if green, then everything is fine. Specific figures can be found in the associated application, which also indicates the degree of filter wear and displays the current indoor climate parameters (temperature, humidity level, etc.). As a programme for remote control of all device functions, the MiHome application is used, available for download to owners of smartphones based on Android or iOs. According to the old tradition of Xiaomi, hieroglyphs sometimes slip through the interface of related software.

Pledge of health

The user can choose one of three modes of operation of the purifier: automatic (fan speed is set depending on the degree of air pollution), night (maximum quiet mode) and user (manual setting of parameters). Once every few months, it is recommended to vacuum the device, and when the life of the air filter is over, it must be replaced with a new one. After all, everyone knows the fact that clean indoor air is the key to good health and well-being.