ViLgrand VFC157
 | Outdated Product Type: fan heater; Controls: rotary knob; Power supply: mains; Max. power: 1500; Heating area (m²): 15; thermostat; Heating modes: Power modes: 2; Heating modes (kW): 0.75 / 1.5; Dimensions (cm): 22x15x9; |
 |
ViLgrand VFC157 | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog ViLgrand 2025 - new arrivals, bestsellers, and the most relevant models ViLgrand.
Inexpensive duika from Ukrainian manufacturer
The Ukrainian-made portable electric fan heater ViLgrand VFC157 is an inexpensive device for local heating of a recreation area, workplace, office or a small room up to 15 m². The body of the heater measuring 22x15x9 cm is made of white heat-resistant plastic and has an oval shape in cross section. On the back cover of the device there is a trough of a hidden carrying handle and an air intake grille, and the heated air is blown out through the facade covered with a protective mesh. The device weighs only 0.75 kg and takes up minimal space on the floor or table.
Heating in winter and ventilation in summer
The heater is equipped with a 1500 W ceramic thermocouple and a quiet fan that provides directional airflow. On the top platform of the housing there are 2 rotary knobs that switch the operating modes and regulate the temperature of the built-in thermostat. The blower can operate at half (750 W) and full power (1500 W), as well as drive cold air without heating, which allows you to use the device both as a heater in the cold season and as a household fan in the summer. Built-in thermal protection will automatically de-energize the device in case of overheating. The heater can be switched on again approximately 10 minutes after it has completely cooled down.
