Dark mode
USA
Catalog   /   Climate, Heating, Water Heating   /   Water Supply & Pumps   /   Submersible (Drainage) Pumps   /   Vihr

Vihr DN-1100N

Photos - Submersible Pump Vihr DN-1100N
Outdated Product
Type: submersible drainage pump; Suitable for: waste water; Maximum performance (L/h): 15500; Maximum head (m): 10; Maximum particle size (mm): 35; Dry run protection; Float switch; Motor power (W): 1100; Protection class (IP): 68; Country of origin: Russia; Impeller / auger material: stainless steel
add to listmy lists
Vihr DN-1100N
performantfloat switch
10 m³/h
8 m
15.5 m³/h
10 m
Main
Suitable forwaste water
Specs
Maximum performance15500 L/h / maximum /
Maximum head10 m / maximum /
Maximum particle size35 mm
Maximum liquid temperature40 °С
Dry run protection
Float switch
Suction systemsingle-stage
Outlet size1", 1 1/4" and 1 1/2"
Engine
Maximum power1100 W
Power sourceelectric
Mains voltage230 V
Engine typeasynchronous
General specs
Protection class (IP)68
Country of originRussia
Pump housing materialstainless steel
Impeller / auger materialstainless steel
Added to E-Catalogjanuary 2015
Powerful electric motor. Efficient pumping of contaminated liquids with solids up to 35 mm in diameter. Housing and impeller made of stainless steel.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Vihr 2024 - new products, best sales and most actual models Vihr.

The east european assembled Vihr DN-1100N pump is made for pumping large volumes of liquids from sewage, basements and cellars flooded with floods, as well as for irrigating land, garden beds and watering gardening areas.

Power and performance

The "insides" of the pump are planted in a steel cylindrical body with a sealed capsule for a 1100-watt engine. It provides liquid lifting to a height of up to 10 m with a supply capacity of over 15 cubic metres per hour. The additional assets of the model should include the possibility of pumping dirty water, in which there are mechanical inclusions up to 35 mm in size.

float switch

A branch with a float switch at the tip of the “tail” is attached to the upper part of the device. This serves to control the level of water decline, thereby preventing the unit from starting "dry". The diameter of the pump outlet line is 1.5". Using the complete fitting, an inch diameter pipe or a hose with an inch and a quarter diameter can be connected to it.

Optimal balance

Of the complaints about the operation of the unit, sometimes there are unflattering reviews about the low reliability of the aluminium winding of the engine, which tends to burn out. On the rest of the fronts, we are presented with an optimally balanced device from the low-cost league of sewer pumps, working off every penny spent.

Additional features submersible pump Vihr DN-1100N:
  • Available with plastic housing
Filters