USA

Timberk IR.ON 2.0 SWH FSI1 80V

Photos - Boiler Timberk IR.ON 2.0 SWH FSI1 80V
Photos 4
Outdated Product
An 80 liter electric storage boiler with increased performance, capable of covering the need for constant access to hot water for a family of 3-4 people and positioned by the manufacturer as a mid-range solution. Made of stainless steel, the tank is additionally protected against corrosion by a periodically replaced magnesium anode, it is accompanied by a seven-year factory warranty, easily withstands high temperatures and is additionally protected from excessive pressure. The flat body insulated with polyurethane retains thermal energy well and harmoniously fits into the bathroom interior. Boiler Timberk SWH FSI1 80V is suspended on a load-bearing wall with pipes from below and connected to a single-phase 230 V household power supply. The built-in thermostat controls the support of the he...ating mode set by the user, while the device easily and simply heats the entire volume of the tank by 30 °C in 84 minutes. The infrared wave emitter used as a heater develops a power of 2000 W and during operation heats the walls, not water, therefore it is absolutely not covered with scale and maintains maximum efficiency throughout the entire period of operation.
add to listmy lists
Timberk SWH FSI1 [IR.ON 2.0 80V]
Timberk IR.ON 2.0 SWH FSI1 80V
Main
Typestorage
Energy sourcemains
Installationvertical
Tank volume80 L
Tank shapeflat
Technical specs
Power source230 V
Power consumption2000 W
Tank liningstainless steel
Water supplywith pressure
Heating time84 min / при ∆t=30 °С /
Magnesium anode
Heating elements1
Heating element typeinfrared
Features
Functionsthermostat
Safety systemsoverheat protection
safety valve
General specs
Controlsmechanical
Controls layoutbottom
Pipe connectionbottom
Tank manufacturer's warranty7 years
Dimensions (HxWxD)98.9x51.6x27 cm
Added to E-Catalogapril 2019

An 80 liter electric storage boiler with increased performance, capable of covering the need for constant access to hot water for a family of 3-4 people and positioned by the manufacturer as a mid-range solution. Made of stainless steel, the tank is additionally protected against corrosion by a periodically replaced magnesium anode, it is accompanied by a seven-year factory warranty, easily withstands high temperatures and is additionally protected from excessive pressure.

The flat body insulated with polyurethane retains thermal energy well and harmoniously fits into the bathroom interior. Boiler Timberk SWH FSI1 80V is suspended on a load-bearing wall with pipes from below and connected to a single-phase 230 V household power supply. The built-in thermostat controls the support of the heating mode set by the user, while the device easily and simply heats the entire volume of the tank by 30 °C in 84 minutes. The infrared wave emitter used as a heater develops a power of 2000 W and during operation heats the walls, not water, therefore it is absolutely not covered with scale and maintains maximum efficiency throughout the entire period of operation.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Timberk 2024 - new products, best sales and most actual models Timberk.
Filters
Models
(volume) 
16 – 30
Out of stock
SWH FSI1
31 – 50
Out of stock
SWH FSI1
51 – 80
Out of stock
SWH FSI1
81 – 100
Out of stock
SWH FSI1