USA

Timberk Attendant 2.0 SWH FED1 80 V

Photos - Boiler Timberk Attendant 2.0 SWH FED1 80 V
Photos 5
Outdated Product
The water heater was created in the form factor of an oblate square (rectangle), specifically in this modification, the boiler has a good capacity — the model holds 80 liters of water, which allows the device to comfortably serve a family of 3-4 people. Water heater Timberk SWH FED1 80 V uses a single heater in the form of a "dry" heating element, the maximum heating power is 2000 W. The inner tank is made of good carbon steel. The working surfaces of the container are protected by the unique SMARTEN enamel, which is rich in silver (Ag) and copper (Cu) ions. Innovative additives make it possible to disinfect water, which significantly improves its quality. The outer shell of the boiler is made of snow-white plastic, while the body itself has protection at the IPX4 level. Installation of th...e water heater provides wall installation, the position is strictly vertical, the pipe connection is from below, the diameter of the pipes is standard, 1/2". The control panel includes indicators for network activity and heating, as well as a water heating temperature regulator.Except for the 80-liter model, the Attendant 2.0 series of boilers additionally includes modifications for 30, 50 and 100 liters.
add to listmy lists
Timberk SWH FED1 [Attendant 2.0 80 V]
Timberk Attendant 2.0 SWH FED1 80 V
Main
Typestorage
Energy sourcemains
Installationvertical
Tank volume80 L
Tank shapeflat
Technical specs
Power source230 V
Power consumption2000 W
Tank liningenamel
Water supplywith pressure
Heating time64 min / при Δt=30°C /
Magnesium anode
Heating elements1
Heating element typedry heater
Features
Functionsthermostat
Safety systemsoverheat protection
dry heating protection
electrical protection (RCD)
safety valve
General specs
Controlsmechanical
Controls layoutfront
Pipe connectionbottom
Tank manufacturer's warranty7 years
Dimensions (HxWxD)98.9x51.6x28.1 cm / weight — 24.8 kg /
Added to E-Catalogfebruary 2017

The water heater was created in the form factor of an oblate square (rectangle), specifically in this modification, the boiler has a good capacity — the model holds 80 liters of water, which allows the device to comfortably serve a family of 3-4 people. Water heater Timberk SWH FED1 80 V uses a single heater in the form of a "dry" heating element, the maximum heating power is 2000 W.

The inner tank is made of good carbon steel. The working surfaces of the container are protected by the unique SMARTEN enamel, which is rich in silver (Ag) and copper (Cu) ions. Innovative additives make it possible to disinfect water, which significantly improves its quality. The outer shell of the boiler is made of snow-white plastic, while the body itself has protection at the IPX4 level.

Installation of the water heater provides wall installation, the position is strictly vertical, the pipe connection is from below, the diameter of the pipes is standard, 1/2". The control panel includes indicators for network activity and heating, as well as a water heating temperature regulator.Except for the 80-liter model, the Attendant 2.0 series of boilers additionally includes modifications for 30, 50 and 100 liters.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Timberk 2024 - new products, best sales and most actual models Timberk.
Filters
Models
(volume) 
16 – 30
Out of stock
SWH FED1
31 – 50
Out of stock
SWH FED1
51 – 80
Out of stock
SWH FED1
81 – 100
Out of stock
SWH FED1