Dark mode
USA
Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   Thermex

Thermex EUROSTAR E906 6 kW
230 V

Photos - Boiler Thermex EUROSTAR E906 6 kW 230 V
Photos 3
Outdated Product
Energy source: electricity; Installation: wall; Type: single-circuit (heating only); Heating area (m²): 48; Heat output (kW): 6; Rated current (A): 28; Coolant min. T (°C): 30; Coolant max. T (°C): 80; Programmable thermostat; Efficiency (%): 99.5; Combustion chamber: no chamber; Firebox size: Dimensions (mm): 740x440x235
add to listmy lists
Thermex EUROSTAR E906 6 kW
230 V
Energy source:electricity
Mount:wall, single-circuit
Boiler power:6 kW, area ~ 48 m²
Weekly programmer (heating timer). Frost protection. The ability to use antifreeze and additives in the coolant.
All specifications
Specifications EUROSTAR E906
Main
Energy sourceelectricity
Installationwall
Typesingle-circuit (heating only)
Heating area48 m²
Technical specs
Heat output6 kW
Min. heat output2 kW
Power supply230 V / or 400 V /
Rated current28 А
Coolant min. T30 °С
Coolant max. T80 °С
Heating circuit max. pressure3 bar
Consumer specs
"Summer" mode
Circulation pump
Programmable thermostat
Boiler specs
Efficiency99.5 %
Combustion chamberno chamber
Expansion vessel capacity6 L
Connections
Central heating flow3/4"
Central heating return3/4"
Safety
Safety systemswater overheating
water circulation failure
frost protection
More specs
Dimensions (HxWxD)740x440x235 mm
Weight25.3 kg
Added to E-Catalogjune 2019
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"

When there is no gas supply

The Thermex EUROSTAR E906 wall-mounted electric boiler is perfect for heating small apartments that do not have a gas supply. The device has a single-circuit design and is designed for heating rooms with an approximate area of 48 m² with the possibility of connecting an indirect heating boiler for organizing hot water supply. The model with a useful power of 6 kW has an electrical protection class of IP40 (without protection against water ingress) and is designed for installation in a room with a humidity of not more than 85%, which allows the installation of the boiler away from the areas where the washbasin and shower are located. The device is powered by a single-phase (230 V) or 3-phase (400 V) connection. The device is characterized by an effective efficiency of 99.5% and is able to provide the temperature of the coolant in the heating circuit in the range of 30 – 80 °C at a maximum allowable pressure of 3 bar.

Antifreeze and frost protection

The heater is equipped with a convenient control panel with a small digital display and touch buttons for settings. The device is equipped with a block of electric heaters, consisting of 3 heating elements with a power of 2 kW, a heat exchange tank, a circulation pump and a 6-liter expansion tank. The built-in security system turns off the device in case of overheating and violation of the circulation of the coolant, and frost protection turns on heating when the temperature in the heating circuit drops below 5 °C. The manufacturer also allows the addition of antifreezes and additives certified for use in electric boilers to the coolant. As a plus of the model, we note its equipment with a timer for the heating system, which allows you to set programme heating settings for a whole week with fine-tuning tasks during each day.

Filters
Models
Brands
(energy source) 
electricity 
Out of stock
EUROSTAR E906