Tenko SKE 15/380 15 kW 400 H
 | Outdated Product Powerful single-circuit electric boiler with low-noise circulation pump for wall mounting. The manufacturer is positioned as a product of the basic price category, it is the senior model of the Tenko Standard line of the 2015 sample. Provides long-term useful heat output up to 12 kW. It can be used for heating cottages, city apartments, office or utility rooms with a total area of up to 1206 m². Equipped with a built-in three-speed circulation pump with an automatic air vent, it is designed for operation in systems with forced circulation of the coolant under pressure up to 3 bar. To power the Tenko SKE 15/380 boiler, it is necessary to connect to a three-phase electrical network with a voltage of 380 V (cable with a cross section of 4x6 mm). Easy to install and maintain, shows excellent e...fficiency (over 99%). Also, this model can be used as an auxiliary/backup heat source in a heating system with a main gas/solid fuel boiler. A two-level overheating protection system is provided with a safety valve and a pressure sensor to detect violations of the coolant circulation. E-Catalog uses affiliate links compensated by our partners. |
Powerful single-circuit electric boiler with low-noise circulation pump for wall mounting. The manufacturer is positioned as a product of the basic price category, it is the senior model of the Tenko Standard line of the 2015 sample. Provides long-term useful heat output up to 12 kW. It can be used for heating cottages, city apartments, office or utility rooms with a total area of up to 1206 m².
Equipped with a built-in three-speed circulation pump with an automatic air vent, it is designed for operation in systems with forced circulation of the coolant under pressure up to 3 bar. To power the Tenko SKE 15/380 boiler, it is necessary to connect to a three-phase electrical network with a voltage of 380 V (cable with a cross section of 4x6 mm). Easy to install and maintain, shows excellent efficiency (over 99%). Also, this model can be used as an auxiliary/backup heat source in a heating system with a main gas/solid fuel boiler. A two-level overheating protection system is provided with a safety valve and a pressure sensor to detect violations of the coolant circulation.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Tenko 2026 - new arrivals, bestsellers, and the most relevant models Tenko.
It was necessary to make normal stationary heating in a separate workshop. There was gas nearby, but there was no point in bothering with gas heating for the unfortunate 18 square meters of space. The cost of design work alone, combined with the price of the cheapest boiler, killed the idea in the bud. But such an electric boiler came up just perfect. This is the most simple and easy to use device. The boiler consists of a large cylindrical heating element, which includes several separate electric heaters, a circulation pump, a control unit and a piping with fittings. Due to the fact that there are several heating elements, the device can operate in three modes of different power. This helps to rationally use electricity when the temperature is above zero and the full three kilowatts are simply not needed. It is important that these three stages correspond to three different speeds of the circulation pump, which makes the heat transfer to the batteries optimal. The control panel itself is very simple. All you need to do is turn on the power, use the step switches to select the power and set the desired coolant temperature, which is adjustable from 15 to 90 degrees. The boiler works very quietly, you can hear the circulation pump, being in another corner of the room, only if it is spinning at full speed. Switching heaters is generally silent. Unlike gas and solid fuel boilers, it does not require a chimney at all and is safer in terms of fire. A situation with a prolonged power outage can be dangerous for the water in the circuit to freeze. Therefore, I immediately decided to fill in not pure water, but its non-freezing mixture with glycol. It has not come in handy yet, but if suddenly something happens, the system will not unfreeze. |