Tecsar TS-44
 | Outdated Product $73.44 up to $74.92 Type: unmanaged; Mount: desktop; Fast Ethernet: 8; Control: PoE (output): 802.3af; PSU: external; Dimensions (mm): 225x121x35; |
 |
Tecsar TS-44 | ||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Tecsar 2024 - new products, best sales and most actual models Tecsar.
The Tecsar TS-44 8-port PoE switch is presented as a low-cost device, but quite balanced in terms of characteristics. Here, the PoE low-cost is 64W, so each of the 4 PoE-enabled ports gets at its disposal 15.4W, provided for by the IEEE 802.3af standard. This is a key difference and at the same time an advantage of this model among many other low-cost switches that have limited load power and do not allow providing 15W per port with simultaneous operation of all 4 ports with PoE support. For example, this switch is able to provide reliable power supply using the same cable that transmits the data stream for 4 PoE IP cameras with powerful night infrared illumination, effective at a distance of 40-60 metres. As you know, often it is the IR LEDs that are the most “gluttonous” component of the PoE surveillance camera. The switch automatically determines the power consumption class of a PoE device when it is connected, and flexibly manages the power consumption of the port.
Maximum data transfer rate
This model is equipped with Ethernet ports with a maximum data transfer rate of 100 Mbps. This is quite enough for the normal operation of computers over the network, and for connecting "fast" active network devices, such as IP cameras or access points with support for the Wi-Fi standard up to 802.11n. A wired network speed of 100 Mbps is enough even to operate IP cameras with a resolution of 5 megapixels. Such cameras are more than enough to create a very high-quality video surveillance system in a private home, small office, and even in a small or medium-sized enterprise.
Energy optimization algorithm
The electronics of the switch is placed in a durable metal case, and for its installation and operation there is no need to perform any complex operations or carry out additional settings - just connect the device to the power supply and it is completely ready for use. At the same time, the switch implements an algorithm for optimizing power consumption, which allows you to reduce power consumption with a low load on the device. Thus, the Tecsar TS-44 switch is optimally suited for operation in the SOHO segment network, which needs reliable and at the same time the most simple and efficient automated management, while not requiring a lot of money and time for installation.
