Start Pro SCD6-12/2DFR
 | Outdated Product Cordless tool for drilling and working with fasteners. The screwdriver has a keyless chuck (with a quick change mechanism) for drills up to 10 mm in diameter, under which there is a hexagonal hole for bits. The two-speed reducer allows to choose one of two working speeds (400/1500 rpm). Depending on the position of the torque adjustment clutch, which has 18 steps, the torque when unscrewing or tightening the fasteners can reach 28 Nm. There are LEDs on the case to illuminate the working area and indicate the remaining battery charge. The Start Pro SCD6-12/2DFR drill driver is supplied as a kit, which, in addition to the power tool itself, includes a plastic case, two 2 Ah batteries and a charger for them, as well as a set of 6 drills and 6 bits with a holder for nozzles . |
 |
Close
We recommend products in stockDrills & Screwdrivers Start →
drill driver, gun, 450/1600 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 18 H, not included, case
drill driver, gun, 360/1400 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 10.8 H, 2, case
drill driver, gun, brushless motor, 500/1650 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 12 H, not included
drill driver, gun, 400/1400 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 12 H
drill driver, gun, 360/1400 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 12 H, 2, case
drill driver, gun, 1600 rpm, cartridge: bit holder and quick-release, Ø 13 mm, reverse, motor brake, power supply: battery, 18 H, not included
drill driver, gun, brushless motor, 400/1500 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 10.8 H, 2, case
drill driver, gun, 450/1600 rpm, cartridge: bit holder and quick-release, Ø 13 mm, reverse, motor brake, power supply: battery, 18 H, not included, case
drill driver, gun, brushless motor, 2000 rpm, cartridge: bit holder and quick-release, Ø 13 mm, reverse, motor brake, power supply: battery, 18 H, not included, case
drill driver, gun, 500/1700 rpm, cartridge: bit holder and quick-release, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, not included
drill driver, gun, 450/1600 rpm, cartridge: bit holder and quick-release, Ø 13 mm, reverse, motor brake, power supply: battery, 18 H, not included, case
drill driver, gun, 500/1700 rpm, cartridge: bit holder and quick-release, Ø 13 mm, reverse, motor brake, power supply: battery, 18 H, not included
drill driver, gun, brushless motor, 550/2000 rpm, cartridge: bit holder and quick-release, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, not included, case
drill driver, gun, 450/1600 rpm, cartridge: bit holder and quick-release, Ø 10 mm, reverse, motor brake, power supply: battery, 18 H, 2, case
drill driver, gun, 500/1700 rpm, cartridge: bit holder and quick-release, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, not included, case
Start Pro SCD6-12/2DFR | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cordless tool for drilling and working with fasteners. The screwdriver has a keyless chuck (with a quick change mechanism) for drills up to 10 mm in diameter, under which there is a hexagonal hole for bits. The two-speed reducer allows to choose one of two working speeds (400/1500 rpm). Depending on the position of the torque adjustment clutch, which has 18 steps, the torque when unscrewing or tightening the fasteners can reach 28 Nm. There are LEDs on the case to illuminate the working area and indicate the remaining battery charge. The Start Pro SCD6-12/2DFR drill driver is supplied as a kit, which, in addition to the power tool itself, includes a plastic case, two 2 Ah batteries and a charger for them, as well as a set of 6 drills and 6 bits with a holder for nozzles .
Drill chuck: types and differencesSpecifics of different types of chucks for drilling and working with fasteners
Which is better: drill, screwdriver or drill-driver?We study the design features and specifics of the use of such similar, but still different types of power tools
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Start 2024 - new products, best sales and most actual models Start.
Before buying always check characteristics and configuration of product with online store manager
Catalog Start 2024 - new products, best sales and most actual models Start.
AccessoriesAll accessories for Start Pro SCD6-12/2DFR →
