Stanley FatMax FMXCMD152WE 2 L 230 V
 | Expecting restock Compressor type: piston; Design: oil-free; Drive: direct; Input performance (L/min): 160; Rated pressure (bar): 8; Power (kW): 1.1; Rotation speed (rpm): 2100; Receiver volume (L): 2; Power source: mains (230 V); Dimensions (cm): 44x23x43; Weight (kg): 13; |
 |
Close
We recommend products in stockAir Compressors Stanley →
oil-free, electric (230 V), at the entrance 160 L/min, at the exit 65 L/min, 8 bar, 0.9 kW, receiver: 6 L, direct drive
oil-free, electric (230 V), at the entrance 180 L/min, 8 bar, 1.1 kW, direct drive, no receiver
oil-free, electric (230 V), at the entrance 190 L/min, at the exit 55 L/min, 8 bar, 1.2 kW, receiver: 6 L, direct drive
oil-free, electric (230 V), at the entrance 180 L/min, at the exit 120 L/min, 10 bar, 1.5 kW, receiver: 24 L, direct drive
oil-free, electric (230 V), at the entrance 89 L/min, at the exit 44 L/min, 8 bar, receiver: 6 L, direct drive
oil-free, electric (230 V), at the entrance 180 L/min, at the exit 45 L/min, 8 bar, 1.2 kW, receiver: 24 L, direct drive
oil-free, electric (230 V), at the entrance 113 L/min, 8.6 bar, 1.1 kW, receiver: 10 L, direct drive
oil-free, electric (230 V), at the entrance 205 L/min, at the exit 145 L/min, 10 bar, receiver: 50 L, belt drive
electric (230 V), at the entrance 193 L/min, at the exit 130 L/min, 8 bar, receiver: 24 L, direct drive
Stanley FatMax FMXCMD152WE | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Before buying always check characteristics and configuration of product with online store manager
Series Stanley FatMax
for walls, 750 W, saw blade 225 mm, 600 – 1700 rpm, speed controller, LED light, additional handle, case
screwdriver, gun, brushless motor, 2800 rpm, 1 speed, cartridge: bit holder, impact mode, reverse, motor brake, power supply: battery, 18 H, not included
clamp meter, fast. voltage: 6000 mV, 600 V, aC voltage: 600 V, aC current: 600 А, resistance: 10 MΩ, autorange, NCV
hammer drilling, 4670 bpm, without a hit, 1250 rpm, chiselling, 800 W, 2.4 J, quick cartridge change, weight 2.7 kg
angle grinder, 1100 W, saw blade 125 mm, 3000 – 11000 rpm, speed controller, additional handle
drill driver, gun, 400/1600 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 2, case
