USA
Catalog   /   Office & Stationery   /   Printing & Polygraphy   /   3D Pens   /   Spider Pen

Spider Pen Plus

Photos - 3D Pen Spider Pen Plus
Photos 7
Outdated Product
Product Type: hot printing; Filament Material: ABS + PLA; Min thread diameter (mm): 1.75; Nozzle Diameter (mm): 0.7; Temperature Adjust; Smooth Speed Adjust; Auto Power Off; Display; Tip Material: ceramics; Country of brand origin: China; Weight (g): 65;
add to listmy lists
Spider Pen Plus
Product Type
hot printing
Filament Material
ABS + PLA
Min thread diameter
1.75 mm
Nozzle Diameter
0.7 mm
Temperature Adjust
Smooth Speed Adjust
Auto Power Off
Display
Tip Material
ceramics
Country of brand origin
China
Weight
65 g
Added to E-Catalog
july 2016
Plastic feed speed adjustment. Display for displaying parameters. Flexible temperature control over a wide range. Heating indication.
Plus differs from the Lite version in a complete set (10 metres ABS, 30 metres PLA).
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Spider Pen 2024 - new products, best sales and most actual models Spider Pen.

Both externally and functionally, the hot printing pen is a copy of the popular Myriwell RP100B model with all its inherent advantages and disadvantages. However, only an uncomfortable grip in the hand due to the bulkiness of the case can be considered as a disadvantage; in other parameters, the 3D pen has an optimal balance of characteristics.

plastic ink

The ink for Spider Pen Plus is ABS or PLA plastic with a thickness of at least 1.75 mm. The inlet for its supply is made in the lower face. Next to it is a connector for supplying power to the handle from a 230 V household power supply. Switching between the types of plastic used for printing is carried out by pressing keys near a small display, the role of which is reduced to displaying settings, as well as showing the current and set temperature conditions.

Flexible adjustments

Flexible adjustment of the plastic melting temperature can be made in the range from 60 to 230°C. The thread feed speed is also subject to change using the slider on the body : in the maximum mode, the plastic takes the form of a thick line, and at low speed its thickness will be thinner, making it easier to draw small details.

Indication

The green indicator on the control panel serves as a signal about the heating of the spout and the readiness of the handle for work. In the meantime, it glows red, there is no need to rush to organize the supply of plastic thread. The demo set of plastic in the box with the device consists of 3 rolls of ABS plastic (3.5 m each) and 3 colours of PLA plastic (10 m each). In addition, the kit includes a book of stencils with tips for drawing three-dimensional objects.

Filters
Spider Pen Plus often compared
3Doodler Start