Rotex RAS10-H

In the low-cost segment of fan heaters, almost all heaters are for one person. The RAS10-H model from Rotex stands out from the mass of similar offers, a compact heater with a vertically elongated hot air outlet grille.

Heating area

The device is designed for heating rooms with an area of 15-20 m², but as practice shows, its place is in the kitchen or in a small room with a square of 10-15 m². The model accelerates the air currents preheated by a spiral around the perimeter of the room very measuredly. At first, the operation of the fan heater is accompanied by a persistent smell of plastic, which disappears over time.

Standard functionality

There are three modes in the heater: heating at half strength, at full power and ventilation without connecting the heating element to the operation. At maximum fan speed, the Rotex RAS10-H consumes 2000 W of power. The desired mode is selected by one of the control wheels on the heater body. At the same time, the function of setting the desired temperature is assigned to the second regulator, which is maintained by the device at the same level using the built-in thermostat.

Availability

For the sake of cheapness, a fan heater is assembled from not the highest quality plastic. Scratches are actively multiplying on the body of the device and technological seams are visible to the naked eye. Also, many users would like to see in the equipment of the device a power cord of greater length than the metre "native". You can turn a blind eye to most of the shortcomings for reasons of affordable cost, especially since all of them are not so critical.