Ronix 2701
 | Outdated Product Medium-power corded hammer drill (800 W) with an impact energy of 3 J and a chuck rotation speed of up to 1100 rpm. Can drill into wood and steel (with drills up to 30 mm and 13 mm in diameter, respectively), and with the hammer function turned on, concrete or masonry (up to 26 mm). It is also possible to work without turning the equipment (slotting mode). The Ronix 2701 rotary hammer chuck is designed for the use of drills and chisels with SDS+ shanks. The tool is supplied with a plastic case, an additional handle, a drilling depth limiter and a small set of 5-piece accessories. |
 |
Close
We recommend products in stockRotary Hammers Ronix →
hammer drilling, 5300 bpm, without a hit, 1200 rpm, chiselling, 800 W, 3 J, weight 3.2 kg
hammer drilling, 5350 bpm, without a hit, 1450 rpm, chiselling, 900 W, 3 J, LED light, weight 3.1 kg
hammer drilling, 4000 bpm, without a hit, 1300 rpm, chiselling, 830 W, 2.7 J, weight 2.7 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 880 W, 3.2 J, weight 2.9 kg
hammer drilling, 5200 bpm, without a hit, 1150 rpm, chiselling, 950 W, 3.5 J, brushless motor, weight 3.5 kg
hammer drilling, 4470 bpm, without a hit, 1150 rpm, chiselling, 800 W, 3.1 J, weight 3.4 kg
hammer drilling, 4000 bpm, without a hit, 1500 rpm, chiselling, 800 W, 4.8 J, weight 3.4 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 880 W, 3.2 J, quick cartridge change, weight 3.1 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 3.1 J, weight 3.5 kg
hammer drilling, 4000 bpm, without a hit, 1500 rpm, chiselling, 800 W, 4.8 J, quick cartridge change, weight 3.6 kg
hammer drilling, 4400 bpm, without a hit, 950 rpm, chiselling, 1050 W, 3.6 J, weight 4.75 kg
Ronix 2701
Operating modes:hammer drilling, without a hit, chiselling
Power:800 W
Impact energy:3 J
Number of strokes:4000 bpm
Idle speed:1100 rpm
Cartridge type:SDS+
Power supply:mains (230 V)
Weight:2.6 kg
Medium-power corded hammer drill (800 W) with an impact energy of 3 J and a chuck rotation speed of up to 1100 rpm. Can drill into wood and steel (with drills up to 30 mm and 13 mm in diameter, respectively), and with the hammer function turned on, concrete or masonry (up to 26 mm). It is also possible to work without turning the equipment (slotting mode). The Ronix 2701 rotary hammer chuck is designed for the use of drills and chisels with SDS+ shanks. The tool is supplied with a plastic case, an additional handle, a drilling depth limiter and a small set of 5-piece accessories.
All specifications
Specifications 2701
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Ronix 2024 - new products, best sales and most actual models Ronix.
Before buying always check characteristics and configuration of product with online store manager
Catalog Ronix 2024 - new products, best sales and most actual models Ronix.
