Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   Protherm

Protherm Puma Condens 18/24 MKV-AS/1 20 kW

Photos - Boiler Protherm Puma Condens 18/24 MKV-AS/1 20 kW
Outdated Product
Energy source: gas; Installation: wall; Type: dual-circuit (heating and DHW); Heating area (m²): 160; Condensing; Heat output (kW): 20; Coolant min. T (°C): 30; Coolant max. T (°C): 75; DHW min. T (°C): 35; DHW max. T (°C): 55; Control bus: eBus; Efficiency (%): 107.8; Combustion chamber: closed (turbocharged)
add to listmy lists
Protherm Puma Condens 18/24 MKV-AS/1 20 kW
20 kW
25.9 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:20 kW, area ~ 160 m²
Combustion chamber:closed
DHW temperature:from 35 °С, up to 55 °С
The circulation pump with frequency regulation of speed. Touch control. Availability of eBus communication bus. The recommended operating pressure of the heating system is 1.5 bar.
All specifications
Specifications Puma Condens 18/24 MKV-AS/1
Main
Energy sourcegas
Installationwall
Typedual-circuit (heating and DHW)
Heating area160 m²
Condensing
Technical specs
Heat output20 kW
Min. heat output6.6 kW
Power supply230 В
Power consumption90 W
Coolant min. T30 °С
Coolant max. T75 °С
Heating circuit max. pressure3 bar
DHW circuit max. pressure10 bar
Consumer specs
DHW min. T35 °С
DHW max. T55 °С
Performance (ΔT ~30 °C)11.5 L/min
"Summer" mode
Circulation pump
Control buseBus
Boiler specs
Efficiency107.8 %
Combustion chamberclosed (turbocharged)
Inlet gas pressure20 mbar
Max. gas consumption2.54 m³/h
Expansion vessel capacity8 L
Coolant performance788 L/h
Heat exchangeraluminium
Connections
Mains water intake1/2"
DHW flow1/2"
Gas supply1/2"
Central heating flow3/4"
Central heating return3/4"
Safety
Safety systemsgas pressure drop
water overheating
flame loss
draft control
water circulation failure
frost protection
More specs
Dimensions (HxWxD)626x400x270 mm
Weight25.6 kg
Added to E-CatalogSeptember 2020
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2026 - new arrivals, bestsellers, and the most relevant models Protherm.
Model overview based on user reviews  
The Protherm Puma Condens 18/24 MKV-AS/1 20 kW is a condensing gas boiler designed for both heating and hot water supply. It is praised for being economical and quiet, even at high power, and it heats water quickly. The boiler is suitable for homes up to 160 m² and features a touch control panel with an LCD display. However, some users have reported issues with the heat exchanger, which is made of aluminum, leading to concerns about its durability. Another common issue is the inlet rubber leaking, which can be mitigated by installing a gearbox to manage pressure. Despite these concerns, the boiler is considered a good value for money, especially in regions with hard water, and offers a modern design with high-quality copper tubes.
Pros

Cons

Under no circumstances, may God protect you No
25 September 2022 
The main heat exchanger rotted in a year and a half, I checked it with a magnet, it sticks. How could lively metal be used for condensation equipment??? The price of a new one is just outrageous, it's better to get a new boiler.
They are not there
Heat exchanger, made of regular metal priced at 20,000 UAH
Timur use Protherm Puma Condens 18/24 MKV-AS/1 more than year
For your money, a very good option.
28 October 2021 
The boiler was bought in a private house of 145 squares. It heats well, quickly, the pump works well, including underfloor heating (as far as I understand there are two pumps, because I clearly hear different noises, but this is not accurate). Heats up water very quickly and is very quiet. On frosty days, I turn on the temperature a little more, and according to the thermostat it is always 50 degrees. There is also a minus here - the gasket leaked after a year, I had to change and install a gearbox with a limit of 3 bar, because there were 7 bar in the system, and apparently it was not designed for such pressure from the outside. We have been using the boiler for a year. During this time he served him. Compared to a domestically produced boiler - ~ 30% more economical? with more capacity. It is possible to connect a thermostat, but probably all modern boilers already support this. Just the old boiler did not support. I note very high quality copper tubes, at all inputs and outputs. Well, a nice screen, looks modern.
Economical and quiet, even at high power. Heats up water quickly. Cool look.
The inlet rubber leaked. I read that this is a disease of these boilers, and it is better to put a gearbox on the input, with a limit of 3-4 bar / atmospheres. Which is what I did.
AndreiPs1994use Protherm Puma Condens 18/24 MKV-AS/1 more than year
Add Review

Gas saving boiler

The condensing gas boiler Protherm Puma Condens 18/24 MKV-AS / 1 consumes 12 – 15 percent less fuel than traditionally designed devices of similar power. Due to the use of the heat of condensation of water vapor, it has a high efficiency (107.8%) and reduced gas consumption (less than 2.54 m³ / h, if "stoker" is full). The built-in circulation pump with frequency speed control and modulating burner also ensure reliable and stable operation of the equipment in low power modes (from 6.6 kW).

Ease of setup and upgrade

The boiler is controlled and its operating modes are set using a touch panel with an LCD display. Thanks to the "block" eBus, any of the Protherm controllers or sensors, as well as compatible analogues that support the same standard, can be connected to the device. Therefore, the boiler can easily work in complex heating and hot water systems (including multi-stage water heating systems with elements such as solar panels or heat pumps).

Inexpensive condensing boiler for home heating and water heating

Protherm Puma Condens 18/24 MKV-AS/1 costs less than $900. This is a very "nice" price (by the standards of double-circuit condensing boilers). The manufacturer managed to reduce the cost by using simpler components (for example, the heat exchanger is made of aluminium, although other companies put more expensive stainless steel). But on the other hand, Protherm boilers are very unpretentious to the quality of water and gas and are not at all “capricious”. Therefore, this unit is perfect if you live in a region with hard water and "orange" gas instead of "blue".