Dark mode
USA
Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   Protherm

Protherm Lynx Condens 30 MKO 31.8 kW

Photos - Boiler Protherm Lynx Condens 30 MKO 31.8 kW
Photos 3
Outdated Product
$970.69 up to $1,060.00
Single-circuit gas boiler designed for heating houses up to 254 m². Due to the condensation principle of operation, the device is highly fuel efficient (according to the manufacturer, this device consumes 12% - 14% less gas than conventional boilers of the same capacity). The gas consumption of the Protherm Lynx Condens 30 MKO boiler, operating in maximum power mode (31.8 kW), does not exceed 3.8 m³/h. The device is equipped with a circulation pump, a closed combustion chamber with a fan for removing flue gases, a cast aluminum heat exchanger with 3 mm thick walls and a set of protective systems (against water overheating, flame extinction, lack of draft, freezing of liquid in the circuit, etc.). Built-in automation and eBus bus allow you to integrate this device into complex heating syste...ms with Protherm regulators. The boiler is designed taking into account the peculiarities of the public utilities of Eastern European countries, so it can work with hard water and poor quality gas.
add to listmy lists
Protherm Lynx Condens 30 MKO 31.8 kW
26.5 kW
31.8 kW
Energy source:gas
Mount:wall, single-circuit
Boiler power:31.8 kW, area ~ 254 m²
Combustion chamber:closed, flue 60/100, 80/125 mm

Single-circuit gas boiler designed for heating houses up to 254 m². Due to the condensation principle of operation, the device is highly fuel efficient (according to the manufacturer, this device consumes 12% - 14% less gas than conventional boilers of the same capacity). The gas consumption of the Protherm Lynx Condens 30 MKO boiler, operating in maximum power mode (31.8 kW), does not exceed 3.8 m³/h.

The device is equipped with a circulation pump, a closed combustion chamber with a fan for removing flue gases, a cast aluminum heat exchanger with 3 mm thick walls and a set of protective systems (against water overheating, flame extinction, lack of draft, freezing of liquid in the circuit, etc.). Built-in automation and eBus bus allow you to integrate this device into complex heating systems with Protherm regulators. The boiler is designed taking into account the peculiarities of the public utilities of Eastern European countries, so it can work with hard water and poor quality gas.

All specifications
Specifications Lynx Condens 30 MKO
Main
Energy sourcegas
Installationwall
Typesingle-circuit (heating only)
Heating area254 m²
Condensing
Technical specs
Heat output31.8 kW
Min. heat output7.5 kW
Power supply230 V
Power consumption80 W
Rated current2 А
Coolant min. T38 °С
Coolant max. T75 °С
Heating circuit max. pressure3 bar
Consumer specs
"Summer" mode
Circulation pump
Control buseBus
Boiler specs
Efficiency104 %
Combustion chamberclosed (turbocharged)
Flue diameter60/100, 80/125 mm / 80/80 mm for separate /
Inlet gas pressure13 mbar
Max. gas consumption3.8 m³/h
Expansion vessel capacity8 L
Heat exchangeraluminium
Connections
Gas supply1/2"
Central heating flow3/4"
Central heating return3/4"
Safety
Safety systemsgas pressure drop
water overheating
flame loss
draft control
water circulation failure
frost protection
More specs
Dimensions (HxWxD)700x390x280 mm
Weight31 kg
Added to E-Catalogapril 2016
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Protherm 2024 - new products, best sales and most actual models Protherm.
FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"
Filters
Models
Brands
(energy source) 
gas