Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   Protherm

Protherm Lynx 28 29.1 kW

Photos - Boiler Protherm Lynx 28 29.1 kW
Photos 6
Outdated Product
The model belongs to the family of wall-mounted gas boilers "Lynx" (Lynx), which are positioned by the manufacturer represented by Protherm as "an inexpensive and reliable solution for heating and preparing hot water for domestic needs." The model is presented on the market in two power options: 24 (Protherm Lynx 24) and 28 (this model). The closed combustion chamber allows you to install the boiler in rooms that are not equipped with a chimney. The manufacturer reports an efficiency of an excellent 92.9%, a maximum gas flow of 3.07 m3 / h, and a DHW system capacity of 12.7 L / min (assuming water heating at 35 °C).
add to listmy lists
Protherm Lynx 28 29.1 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:29.1 kW, area ~ 218 m²
Combustion chamber:closed, flue 60/100 mm
DHW temperature:from 30 °С, up to 64 °С

The model belongs to the family of wall-mounted gas boilers "Lynx" (Lynx), which are positioned by the manufacturer represented by Protherm as "an inexpensive and reliable solution for heating and preparing hot water for domestic needs." The model is presented on the market in two power options: 24 (Protherm Lynx 24) and 28 (this model). The closed combustion chamber allows you to install the boiler in rooms that are not equipped with a chimney. The manufacturer reports an efficiency of an excellent 92.9%, a maximum gas flow of 3.07 m3 / h, and a DHW system capacity of 12.7 L / min (assuming water heating at 35 °C).

All specifications
Specifications Lynx 28
Main
Energy sourcegas
Installationwall
Typedual-circuit (heating and DHW)
Heating area218 m²
Technical specs
Heat output29.1 kW
Min. heat output13 kW
Power supply230 В
Power consumption98 W
Coolant max. T85 °С
Heating circuit max. pressure3 bar
DHW circuit max. pressure8 bar
Consumer specs
DHW min. T30 °С
DHW max. T64 °С
Performance (ΔT ~30 °C)12.7 L/min
"Summer" mode
Warm start
Circulation pump
Control buseBus
Boiler specs
Efficiency92.9 %
Combustion chamberclosed (turbocharged)
Flue diameter60/100 mm / 80/80 for split flue /
Inlet gas pressure20 mbar
Max. gas consumption3.07 m³/h
Expansion vessel capacity7 L
Expansion vessel pressure1 bar
Connections
Gas supply1/2"
Central heating flow3/4"
Central heating return3/4"
Safety
Safety systemsgas pressure drop
water overheating
flame loss
draft control
water circulation failure
frost protection
More specs
Dimensions (HxWxD)700x444x280 mm
Weight33 kg
Added to E-CatalogAugust 2012
P/N
0010010835

0010015363

The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Protherm 2026 - new arrivals, bestsellers, and the most relevant models Protherm.
good model, liked it
30 October 2017 
Good boiler. if you do not take into account that after our gas you have to clean the flame control sensor ... how it's done took a review: https://youtu.be/a5WcCxiBfPc
cheap and economical
needs to be serviced more often than expensive models
use Protherm Lynx 24 more than year
can be considered as an option
28 November 2017 
In general, in terms of price/quality ratio, the boiler is not bad, but there is one problem in operation that you need to be prepared for, namely, due to the disgusting quality of the gas in our systems, soot accumulates on the ionization flame control sensor and the boiler begins to give an error or go out when ignited , this soot needs to be cleaned approximately once a season. There are two ways - the first is a service center and considerable expenses, and the second is to do it yourself, because... There is nothing complicated about this, I want to share with you how easy it is to carry out this procedure yourself: https://youtu.be/a5WcCxiBfPc
Price
sensor clogged
use Protherm Lynx 24 month or more i recommend it should buy
The main thing is to choose the right one for your area
23 August 2018 
From my own experience, I can say that the best gas boilers currently on sale are condensing boilers. Since 2016, I've been using the condensing "Protherm Lynx". Before that, I used several different types of boilers, including a cast iron floor-standing one and a decent wall-mounted one, but none compare to the Lynx. Each one had its advantages but also significant disadvantages. With this boiler, I don't see any drawbacks.
Despite its high efficiency, the boiler is quite economical. The key is to choose the right modification for your area and house construction. There's no need to chase after crazy kilowatts with the principle that the more kilowatts, the warmer it will be. That's not the point at all; you need to choose the optimal equipment. Then it will heat well and be cost-effective. The more the condensing boiler is loaded with power (talking about intense periods when a lot of gas is used), the higher the efficiency and savings.
The boiler is modern, convenient and easy to use, safety is at the highest level. But for me the main thing is efficiency.
i do not see
use Protherm Lynx 24 more than year
Add Review