Polymerteplo LV-4T monoblock
Photos 9 | Outdated Product Type: household; Water temperature: for cold / hot water; Principle of operation: electromagnetic; Diameter (DN) (mm): 15; Max. pressure (MPa): 1.6; Min. water flow (Qmin) (m³/h): 0.06; Transitional water flow (Qt) (m³/h): 0.15; Rated water flow (Qn) (m³/h): 1.5; Max. water flow (Qmax) (m³/h): 3 |
Polymerteplo LV-4T monoblock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
The metre takes into account water at a cold rate up to a temperature of 40 °C, and above 50 °C — hot. The installation length is the same as that of conventional household metres, which makes it possible to replace a mechanical metre without unnecessary difficulties.
The counter works from the built-in battery with service life not less than 6 years. The temperature sensor is installed in a metal sleeve, does not require installation of additional fittings on the pipeline
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Polymerteplo 2024 - new products, best sales and most actual models Polymerteplo.
Before buying always check characteristics and configuration of product with online store manager
Catalog Polymerteplo 2024 - new products, best sales and most actual models Polymerteplo.
Additional features water metre Polymerteplo LV-4T monoblock:
- Degree of protection of the case of the counter IP 54
- 1. The volume of hot water with a temperature below 40 °C — it takes into account water with a temperature below 40 °C, which is paid according to the tariff set for cold water.
- 2. Adjusted volume of hot water, it takes into account:
- the volume of water that came with a temperature of 40 to 45 °C with a reduction factor of 0.7 (70% of the payment for water heating);
- the volume of water supplied with a temperature of 45 to 50 °C with a reduction factor of 0.9 (90% of the water heating fee);
- the entire volume of water that came with a temperature of more than 50 °C (water is considered 100% hot);