Philips HU3918/10 (57100-5389269)
 | Outdated Product Type: humidifier; air washer; evaporative; Humidification area (m²): 45; Sterilization: air flow adjustment; night mode; timer; display; Controls: touch controls; Operating time (h): 10; Water consumption (mL/h): 300; Max. noise level (dB): 33; Power (W): 25; Power source: mains; |
 |
Philips HU3918/10 | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Philips 2024 - new products, best sales and most actual models Philips.
Stylish and informative
The Philips humidifier is made in black with bronze inserts, due to which it pleasantly stands out against the background of traditionally pure white or black counterparts.
The model is equipped with an electronic control with four buttons and a display that shows the humidity level in real time. It is stated that the digital sensor available here analyzes the corresponding indicator every 3 seconds, so a separate hygrometer is definitely not required.
Automatic or manual settings
Thanks to the built-in hygrostat, fully automatic operation of the Philips HU3918/10 is possible. It is necessary to set the required humidity level (40, 50 or 60%), and then the automation will monitor its maintenance by changing the operating parameters of the device.
Available to the user and manual performance settings with a choice of one of three fan speeds. Plus, there is a shutdown timer from 1 to 9 hours and a special night mode with quiet operation. In it, the model should not be heard at all, because even in other scenarios the maximum noise level does not exceed 33 dB.
Efficient and easy to operate
At the base of the Philips HU3918/10 is a 3-liter reservoir. It is permissible to fill in ordinary tap water here, since the water humidification technology (NanoCloud) eliminates the appearance of plaque. You will have to replenish liquid supplies less than once every 10 hours, because at the maximum fan speed, the capacity is 300 mL / hour. And these parameters should be enough for rooms up to 45 m².
Caring for the model is easy, because instead of the usual drum with blades, a branded moisturizing filter is used here. To clean it, it is recommended to place it once a week for an hour in water with the addition of citric acid. That is, neither disassembly nor any intricate procedures for removing hard-to-reach contaminants are required.
But this filter is a consumable product designed for 6 months: every six months you need to buy a new one. If this is not critical for you, then the Philips HU3918/10 is a worthy option with a nice design, quiet operation and easy maintenance.
