Noirot CNX-4 1500 1.5 kW

Heat in 45 seconds

The French electric convector Noirot CNX-4 1500 does not inspire reverence with its usual appearance, and when you look at its high price, you are perplexed. But the deceptiveness of the first impression becomes apparent when the details of the technology and equipment of the device are clarified. This model has an average power of 1.5 kW, sufficient for comfortable heating of rooms up to 15 m2. The main feature of the device is a one-piece cast heating element RX-Slience Plus, made of high-quality aluminium alloy using a patented technology. The X-shaped heater with a shell surface and an increased area of fins has an efficiency of 99% and is characterized by silent and efficient operation. Due to the high heating rate, warm air enters the room within 45 seconds after the convector is turned on.

Surge Protection

The body of the heater is made of stainless steel 0.6 mm thick and painted with a double layer of matte enamel. During operation, it does not heat up above 65 °C, and the IP24 protection class allows the convector to be used even in wet rooms. The device is equipped with a high-precision ASIC electronic thermostat, which maintains the set temperature with an accuracy of 0.1 °C, automatically turning off and on heating as needed. The model received 2 dial switches in the mechanical control unit, which make it possible to select the operating mode and set the desired heating temperature. Preset modes are available to the user: comfortable, economical (3-4 °C lower than comfortable), as well as antifreeze (approximately 5-7 °C). Built-in overheating protection, class II electrical protection, a safe connection that does not require grounding, and a voltage surge protection system (150 – 242 V) allows you to leave the heater unattended, continuously working all day long.

Made in France

The basic delivery of the convector provides wall mounting of the device. To do this, he has 2 brackets and a set of fasteners. If you plan to use the heater for local heating in different rooms, then you should additionally purchase legs with rollers, which will cost about 10% of the cost of the device. The model is not only designed, but also manufactured in France, where strict quality and environmental standards apply. Despite the fact that the device has high reliability and a long service life, and the manufacturer gives a lifetime warranty on the convector, which actually amounts to 10 years of design operation. However, this is a considerable period, in comparison with similar models of other brands that have only 3 years of service obligations.