Neoclima Comforte 1.5 1.5 kW
Outdated Product $26.52 up to $55.32 Type: convector Heater; Controls: rotary knob; Power supply: mains; Max. power: 1500; Heating area (m²): 15; thermostat; emergency heating; Heating modes: Power modes: 2; Heating modes (kW): 0.75 / 1.5; Dimensions (cm): 45х60х10; |
Neoclima Comforte 1.5 | |||||||||||||||||||||||||||
|
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Neoclima 2024 - new products, best sales and most actual models Neoclima.
Before buying always check characteristics and configuration of product with online store manager
Catalog Neoclima 2024 - new products, best sales and most actual models Neoclima.
From the press release
High degree of environmental friendliness
Owing to the low temperature of the heating elements, the large heat exchange area and intensive air washing of the heating element, oxidative processes are excluded, and air oxygen is not consumed.
Minimum power consumption
The use of high-precision temperature control devices, room temperature control (thermostating), the use of materials with high heat transfer allowed NEOCLIMA electric convectors to eliminate unproductive heat losses and achieve best-in-class efficiency values.
Work resource
The accepted principle of temperature control, high quality of heating elements, absence of moving parts allows us to guarantee the value of the resource (service life) of products for at least 10 years.
Temperature maintenance accuracy
The use of high-precision capillary thermostats with a remote sensor makes it possible to maintain the temperature in the room with an accuracy of ± 1 °C, which helps to avoid excessive energy consumption during changing weather conditions, frequent opening of doors and windows, and at the same time maintain a comfortable temperature in the room.
Easiest installation and maintenance-free
Upon purchase, the heater is 100% ready for operation. For installation, it is enough to drill 4 holes in the wall, screw self-tapping screws into the holes, hang the heater using the bracket and turn on the electric plug. cord into an outlet. After all these simple steps, the heater is ready for operation, moreover, everything necessary for installation is included in the factory kit along with instructions. Maintenance consists only of removing dust from the inlet and outlet grates as needed.
The model is produced in the following modifications, which are indicated in brackets after the model name:
High degree of environmental friendliness
Owing to the low temperature of the heating elements, the large heat exchange area and intensive air washing of the heating element, oxidative processes are excluded, and air oxygen is not consumed.
Minimum power consumption
The use of high-precision temperature control devices, room temperature control (thermostating), the use of materials with high heat transfer allowed NEOCLIMA electric convectors to eliminate unproductive heat losses and achieve best-in-class efficiency values.
Work resource
The accepted principle of temperature control, high quality of heating elements, absence of moving parts allows us to guarantee the value of the resource (service life) of products for at least 10 years.
Temperature maintenance accuracy
The use of high-precision capillary thermostats with a remote sensor makes it possible to maintain the temperature in the room with an accuracy of ± 1 °C, which helps to avoid excessive energy consumption during changing weather conditions, frequent opening of doors and windows, and at the same time maintain a comfortable temperature in the room.
Easiest installation and maintenance-free
Upon purchase, the heater is 100% ready for operation. For installation, it is enough to drill 4 holes in the wall, screw self-tapping screws into the holes, hang the heater using the bracket and turn on the electric plug. cord into an outlet. After all these simple steps, the heater is ready for operation, moreover, everything necessary for installation is included in the factory kit along with instructions. Maintenance consists only of removing dust from the inlet and outlet grates as needed.
The model is produced in the following modifications, which are indicated in brackets after the model name:
- m — without power regulator
- c — with step power regulator
- b — splash-proof execution of the shell
- sh — with a stamped grating
- n — with stamped stainless steel grating