USA

Mitsubishi Electric VL-50ES2-E

Photos - Recuperator / Ventilation Recovery Mitsubishi Electric VL-50ES2-E
Outdated Product
System type: decentralized; Ventilation type: recuperator; Mounting: wall; Mounting diameter: 120; Max. noise level (dB): 37; Type of heat exchanger: plate; Heat exchanger material: cellulose; Power consumption in ventilation mode (W): 19;
add to listmy lists
Mitsubishi Electric VL-50ES2-E
Mitsubishi Electric VL-50ES2-E
System type
decentralized
Ventilation type
recuperator
Mounting
wall
Mounting diameter
120 mm
Minimum air flow (recuperation)
15 m³/h
Maximum air flow (recuperation)
54 m³/h
Minimum noise level
15 dB
Maximum noise level
37 dB
Type of heat exchanger
plate
Heat exchanger material
cellulose
Heat exchanger efficiency
86 %
Remote control
Power consumption in ventilation mode
19 W
Mains voltage
230 V
Country of origin
Japan
Dimensions
522x245x168 mm
Weight
6.2 kg
Added to E-Catalog
august 2018
Air flow adjustment. Low noise. Horizontal and vertical mounting methods are allowed.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Mitsubishi Electric 2024 - new products, best sales and most actual models Mitsubishi Electric.

The Mitsubishi Electric VL-50ES2-E air handling unit with recovery supplies over 50 “cubes” of fresh air per hour to the room being served. The device can be used for ventilation all year round, and its strength is sufficient to work effectively in a kitchen or living room with an area of 17-20 m².

Versatility of installation

The model can be wall mounted in a horizontal or vertical position. Air is supplied and removed to the installation through an air duct with a diameter of 120 mm. In winter, it is heated and humidified by warm air masses that are removed from the room, and in summer the supplied air is partially cooled and dried. For ventilation of residential premises, the recuperator is used in the temperature range outside the monastery from -10 to +40 °C.

Language of numbers

The air flow is adjustable from a modest figure of 15 m³/hour to 54 m³/hour. Also, depending on the speed of rotation of the fan impeller, the noise threshold of the installation “floats” - “at minimum settings” the heat exchanger makes noise no louder than 15 dB, due to which its operation will not disturb the light sleep of household members. On frosty days, the device can operate in the “Exhaust Only” mode, blocking the supply channel if it is too cold outside.

Workhorse

The model uses a plate membrane heat exchanger as a recuperator. It helps maintain a comfortable temperature and humidity level in the room. The unit is turned on and off using a cord switch, fan rotation speeds are adjusted with a separate switch. This unpretentious “workhorse” will provide the monastery with fresh air for the benefit of the well-being of household members and maintaining comfortable microclimate conditions in the home.

Filters
Models
Brands
(system) 
decentralized 
Out of stock
VL-50ES2-E