Kospel EKCO.L2 24 24 kW 400 H
 | Outdated Product Energy source: electricity; Installation: wall; Type: single-circuit (heating only); Heating area (m²): 192; Remote control unit; Heat output (kW): 24; Coolant min. T (°C): 20; Coolant max. T (°C): 85; Combustion chamber: no chamber; Firebox size: Dimensions (mm): 710x418x251; Weight (kg): 18 E-Catalog uses affiliate links compensated by our partners. |
Kospel EKCO.L2 24 24 kW
400 H
4 kW
230 V
6 kW
230 V
8 kW
230 V
12 kW
400 H
15 kW
400 H
18 kW
400 H
21 kW
400 H
24 kW
400 H
30 kW
400 H
36 kW
400 H
Energy source:electricity
Mount:wall, single-circuit
Boiler power:24 kW, area ~ 192 m²
All specifications
Specifications EKCO.L2 24
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Kospel 2026 - new arrivals, bestsellers, and the most relevant models Kospel.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Kospel 2026 - new arrivals, bestsellers, and the most relevant models Kospel.
AccessoriesAll accessories for Kospel EKCO.L2 24 →
0 1 2 2 |
We installed all types of boilers at home; for electrical, we chose a Kospel (30kW) because my parents have had one for 15 years with no problems. Does the job 100%, heats a space of 250 square meters, and I only set 2 heaters in the heating settings just to maintain the temperature, otherwise it reaches the set temperature in the system very quickly. The consumption will only be 20 kW, roughly speaking, saving you money... Why do I do this? Because the temperature sensor in the house doesn't quickly sense air temperature changes, but the water in the system cools down very fast, making the heated floor quickly become cool, even though the air is still warm and the boiler doesn't activate accordingly. So, it's better to keep it at a minimum but running. Overall, the boiler works excellently, I've been using it for more than 2 years, and there are no complaints about its performance. There's no expansion tank, about 10 years ago it was built right into the boiler, and that was convenient. Now, you have to add one, which means more piping, etc... extra money. The boiler is noisy, or more precisely, the outer cover is. No matter how I tried attaching it with double-sided tape or using various papers and rubber, it bangs like crazy when it’s heating up. If your boiler room shares a wall with your bedroom, it'll be awful! It’s a single-circuit boiler, but that's not really a downside, more of a feature. Nowadays, it’s either a water heater or gas... it's a matter of choice. Upon first startup or when the system gets airlocked, it can't push out the air on its own, so you need to find what to press to get it to burp.  Alex: |
They made a heating system in the administrative premises of a manufacturing enterprise. The boiler was bought as a reserve in pair with a gas boiler. And since there was a hitch with the connection to the gas main, he worked for about a month as the main one. Manufactured in Poland with truly European quality. There is multi-level power regulation of electric heaters. The phase switching is electronic, on semiconductor power switches. Operates quietly and with high efficiency. The heating unit and the electric heaters themselves are made of high-quality corrosion-resistant steel. Simple installation (no exhaust system for combustion products as in fuel boilers) and easy connection to the heating system. Everything needed for installation and almost everything for connection is included. A smart boiler control system. You can set the temperature of the coolant in the heating circuit or the air temperature according to the thermostat, control and adjust the parameters of the water in the hot water supply system. In short, minimum buttons - maximum information. In case of overheating, there is an emergency shutdown system for the heaters. So even if the coolant leaves the system, the boiler will survive. Reasonable cost. Rising cost of electricity. After connecting the gas, this boiler was immediately transferred to the reserve. use Kospel EKCO.L2 24 month or more |
I needed to make autonomous heating in my workshop. I chose the option with electric heating, because there is no gas nearby, and it is too troublesome to heat a solid fuel boiler when you only have to work for three or four hours. Yes, electricity is not cheap, but it is ideal for occasional use. I chose Kospel because I am already familiar with this Polish brand. At home there is a gas boiler of this manufacturer and I am completely satisfied with it. The boiler is silent and trouble-free, practically maintenance-free. Neither you clean the chimney and ash pan as in solid fuel boilers, nor the headache with gas pressure that torments the owners of gas boilers. Convenient weekly programmer. Since I know when I will come to work tomorrow, I simply set the programmer to start an hour before my arrival and go into a warm room. The boiler is equipped with a six-stage power regulator, which allows you to save energy. The regulation is implemented on modern semiconductors, works reliably and efficiently. Frost protection prevents the temperature in the workshop from dropping too low and protects the heating circuit from defrosting. Since the boiler is electric, I didn’t have to mess with installing a chimney. Cracks while working. It looks like thermal expansion. It was a little annoying at first, but over time I got used to it. For gentle automation, you need a voltage stabilizer; without it, it can spontaneously turn off. use Kospel EKCO.L2 8 month or more |
3 out of 5 user review(s) shown
2 more user review(s)
Additional features boiler Kospel EKCO.L2 24:
- Degree of protection of electrical equipment — IP21