FUBAG MASTER G600/1.4 HVLP (R) (110106)

The German-Chinese company FUBAG has been present on the construction and repair equipment market for over 40 years. Quality control and compliance with international standards favorably distinguish its products from most brands of similar value. Pneumatic paint sprayer MASTER G600/1.4 HVLP (R) is an example of a good quality tool at a reasonable price. The prefix R means the presence of a gearbox (pressure gauge) in the kit.

Universal spray gun

The body of the model is made of metal alloy, the nozzle is made of steel. The quality of materials and assembly is top notch. But the weight of the device is far from small — 900 grams (and this is without a pressure gauge), which is almost twice as much as other top models. Add here the tank still loaded with the paint mixture and we get more than 1.5 kilograms in the hand, which is not easy even for an experienced craftsman.

Good performance

The MASTER G600/1.4 HVLP (R) has an HVLP (High Volume Low Pressure) spray system with a nominal pressure of 3.5 bar. The diameter of the complete nozzle is 1.4 mm and is optimal for applying varnish and acrylic paints. The manufacturer also produces nozzles of 1.8, 2 and 2.5 mm, which can significantly expand the range of spray gun capabilities. The air consumption of 198 L/min provides the use of medium-power compressors with a capacity of 260 hp or more.

The gun is equipped with a paint filter, adjustment of the torch, air and material supply, a quick-release fitting for connecting an air hose and a pressure gauge to control the inlet pressure, which was already mentioned at the beginning. In general, a complete ammunition load.

In operation, the spray gun is quite practical, but the nut under the trigger on the stem has to be tightened periodically. It is also difficult to find a repair kit on the market, so careful operation is recommended.

In general, FUBAG MASTER G600 / 1.4 HVLP (R) is a very practical pistol for its price, and, perhaps, one of the best from China.