Feniks Series E Plus 22 22 kW
 | Outdated Product Energy source: solid fuel; Installation: floor; Type: single-circuit (heating only); Heating area (m²): 176; Fuel bunker; Heat output (kW): 22; Coolant min. T (°C): 60; Coolant max. T (°C): 90; Efficiency (%): 85; Combustion chamber: open (atmospheric); Firebox size: Size (mm): 600x326 |
 |
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Feniks 2024 - new products, best sales and most actual models Feniks.
The automated pellet boiler Feniks Series E Plus 22 is designed for heating private, commercial and non-residential buildings with an area of up to 176 m².
Big bunker
The boiler consists of the main boiler part and a 400-liter bunker attached to it. A full bunker load provides continuous heating for several days, depending on the conditions and quality of the pellets, without the need for manual intervention. The boiler automation regulates both the fuel supply and the combustion intensity.
Increased heat exchanger area
The heat exchanger of the Feniks Series E Plus 22 boiler is made of heat-resistant steel and has a surface area of 2 m², which allows for efficient use of energy and fuel savings. The control unit is installed on the top panel of the boiler, and the outlet for the chimney with a diameter of 159 mm is located at the back.
Four access doors
There are four doors on the front panel of the boiler: the upper one is for cleaning the heat exchanger, the lower one is for access to the ash pan, and two middle ones are for loading fuel. The upper middle door is designed for loading firewood and coal briquettes, the lower middle one is for pellets. Under the second door from the bottom is a burner with an automatic pellet feed system. The main disadvantage of the model is its relatively low efficiency - about 85%, but the boiler is available in a wide range of capacities from 17 to 250 kW.
