Faber SkyLift X/WH F90 white (110.0324.939)

Control from the hob

The fully built-in ceiling hood Faber SkyLift X/WH F90 differs from its peers in its concealed installation and the convenience of the mechanism of vertical movement into the working position. Since the traditional air cleaner control is not available due to its high location, the control unit with 2 push buttons is built into the hob. In addition, the device is equipped with a remote control, which allows you to control the device from a distance. Both from the control unit and from the remote control, you can lower and raise the hood to the desired height, select one of 5 cleaning intensity speeds and control 2 Bar Velo 3000K LED strips with a total power of 3 W.

Lifting mechanism with electric drive

The mechanism for lowering and raising the cleaning unit is made on 4 suspension cables, the length of which is changed by means of electric drives. The built-in ceiling hood is designed for air recirculation and provides a high capacity of 730 m³/h. The body of the air cleaner is made of stainless steel, and the lower operating panel is made of milky white glass. Despite the fact that the perimeter air capture system is designed to reduce the noise level by 25%, during operation in turbo mode without noise insulation elements installed, it has a high value of 69 dB. However, the operation of the turbo mode is limited to 6 minutes, after which the hood returns to the previously set fan speed. An aluminium grease filter and an adsorption-type carbon filter (option) are used to purify the air. As the filters become dirty, the indicator informs you of the need to replace or clean them.