EnerGenie EG-AVR-D1000-01 1 kVA / 600 W
 | Outdated Product Relay stabilizer with passive cooling, designed for installation on the floor. The device is designed to service loads up to 600 watts. The EnerGenie EG-AVR-D1000-01 stabilizer is equipped with one outlet, which can be used to turn on electricity consumers. The device can operate at input voltage from 140 V to 260 V. Voltage regulation is carried out with an acceptable (for domestic needs) accuracy of 8%. The current parameters of the current at the output of the stabilizer are displayed on a digital display, which is located on the front panel of the device. E-Catalog uses affiliate links compensated by our partners. |
EnerGenie EG-AVR-D1000-01 1 kVA / 600 W | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Relay stabilizer with passive cooling, designed for installation on the floor. The device is designed to service loads up to 600 watts. The EnerGenie EG-AVR-D1000-01 stabilizer is equipped with one outlet, which can be used to turn on electricity consumers. The device can operate at input voltage from 140 V to 260 V. Voltage regulation is carried out with an acceptable (for domestic needs) accuracy of 8%. The current parameters of the current at the output of the stabilizer are displayed on a digital display, which is located on the front panel of the device.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog EnerGenie 2026 - new arrivals, bestsellers, and the most relevant models EnerGenie.
For a 600W Device
The EnerGenie floor voltage stabilizer is made in a durable metal case and features a compact size — only 21×14×12 cm, allowing it to be easily hidden from view. Stability on various surfaces is ensured by four legs, and the built-in display shows the current output voltage.
The EnerGenie EG-AVR-D1000-01 model is designed for a load up to 1000 VA, which with one socket corresponds to a connected power of about 600W. This device is suitable for protecting refrigerators with high inrush currents, heating equipment, audio and video equipment, personal computers. For more demanding tasks, the senior version EG-AVR-D2000-01 with two sockets and power up to 1200W is available.
With Delay or Without
The stabilizer is equipped with a switch for delaying the reactivation after protection kicks in, providing two operating options — short pause (6 seconds) or long (3 minutes). The latter mode is preferable for equipment with a compressor to avoid frequent on/off cycles.
The device is equipped with a standard set of protections and a passive cooling system with ventilation holes on the sides. A minor downside could be its weight of 3.3 kg, but thanks to the built-in handle, the stabilizer is easy to carry. The EnerGenie EG-AVR-D1000-01 falls into the mid-price segment and is an excellent choice for protecting a refrigerator or other sensitive electronics.