Einhell Home TH-SM 2131 Dual
 | Outdated Product $146.80 up to $179.40 Product type: miter power saws; Type: stationary; Power source: mains (230 V); Power (W): 1800; No load blade speed (rpm): 5000; Bar/blade size (mm): 210; Bore diameter (mm): 30; Cutting depth (mm): 62; Cutting width (mm): 310; laser marker; dust collector; Noise level (dB): 104; Size (mm): 650x540x420 |
 |
Einhell Home TH-SM 2131 Dual | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Einhell 2024 - new products, best sales and most actual models Einhell.
The German manufacturer Einhell has been operating since 1964 and produces a wide range of quality equipment. Miter saw TH-SM 2131 Dual is a functional, performant tool at an affordable price of €150.
Convenient installation
The machine is made in a branded bright red colour, has dimensions of 650x540x420 mm and a weight of 11 kg. The saw can be installed both permanently, with screwing to a workbench, and on plastic supports so as not to damage, for example, parquet or laminate.
Ability to work with wide workpieces
The main feature of the tool is a two- bar broach mechanism, which makes it possible to work with wide workpieces. The tool provides a cutting width at a right angle of 310 mm, at an angle — 210. At the same time, the saw can tilt by 45º, both to the left and to the right. Table extensions allow you to increase it by 100 mm on each side, and cut not only wide, but also long workpieces.
To perform an accurate and accurate cut, a laser marker and a clear, well-visible scale carved into the metal are provided, which does not rub off even after years of operation.
For hard woods and aluminium
The saw shows high performance. Under load, the engine power increases from 1500 to 1800 W, which allows you to cope with especially hard woods. However you can work in this mode for less than 5 minutes. The tool is also not intended for sawing angles and profiles made of steel. Maximum, thin-walled aluminium or silumin.
For more performant tasks, it makes sense to purchase a model with a higher rank — Einhell TH-SM 2534 Dual. It has more power and disc diameter.
Our model is equipped with a 210 mm saw blade with 48 teeth. Considering the affordable price and compactness, combined with good functionality, the Einhell TH-SM 2131 Dual will be a useful purchase for a furniture or carpentry shop, as well as for a mobile team of builders.
