USA
Catalog   /   Tools & Gardening   /   Construction Power Tools   /   Wall Chasers & Floor Saws   /   Einhell

Einhell Home TH-MA 1300 (4350730)

Photos - Wall Chaser Einhell Home TH-MA 1300
Videos 1Photos 6
Outdated Product
Product type: wall chaser; Type: electric; Supply voltage (V): 230; Work part: disk; Working disks / cutters: 2; Power consumption (kW): 1.32; Disc/cutter size (mm): 125; Bore diameter (mm): 22.2; Rotation speed (rpm): 9000; Processing width (mm): 8 – 26; Processing depth (mm): 8 – 30
add to listmy lists
Einhell Home TH-MA 1300
Einhell Home TH-MA 1300
Product type
wall chaser
Type
electric
Supply voltage
230 V
Work part
disk
Working discs / cutters
2
Power consumption
1.32 kW
Disc/cutter size
125 mm
Bore diameter
22.2 mm
Rotation speed
9000 rpm
Processing width
8 – 26 mm
Processing depth
8 – 30 mm
Functions
soft start
electronic motor protection
Case included
Noise level
104 dB
Weight
4.8 kg
Official Website
isc-gmbh.info
Added to E-Catalog
august 2017
P/N
4350730

Smooth start. Electronic engine protection.
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Einhell 2024 - new products, best sales and most actual models Einhell.
Video reviews

Entry Level Tool

The Einhell TH-MA 1300 wall chaser is equipped with a moderate power (1300 W) motor because it is designed to perform relatively simple work related to preparing for the installation of hidden wiring during construction or repair work. The power reserve is enough to confidently cut strobes in masonry and aerated concrete blocks. Users note that the tool is reluctant to work on concrete: it cuts rather slowly, and the engine protection often works against overloads. But the low price, as it were, hints that one should not expect too much from this wall chaser.

Design features

The device does not weigh very much (4.8 kg), but the load on the hands is felt. Therefore, the wall chaser is equipped with an additional handle. It distributes the weight between two hands and allows you to guide the cutting blade exactly along the markings. There are no jerks when starting the engine, because the wall chaser is equipped with a starting current limiter. The speed is not adjustable, but the idle speed (9000 rpm) gives some margin, which is enough for simple work.

The wall chaser comes with two diamond cutting discs with a diameter of 125 mm and six intermediate washers. By rearranging the washers, you can change the width of the strobe in the range from 8 to 26 mm. The depth of the groove is changed with the adjusting screw on the casing.

The design of the tool provides the ability to connect a vacuum cleaner. But users complain that due to the unfortunate shape of the protective cover, even with the vacuum cleaner connected, dust flies in all directions. Therefore, you cannot do without a good respirator and safety glasses during work. The short power cord (2 m) also causes criticism, because of which you have to use extension cords and carriers.

A simple wall chaser for simple tasks

Despite not the highest power, the Einhell TH-MA 1300 wall chaser will confidently cope with work that cannot be done with a conventional grinder. But the manufacturer emphasizes that Einhell tools in general and wall chasers of this brand in particular are not professional tools. They are intended for those who independently carry out small repairs at home, in the country or in the garage.

Filters
Models
(product type) 
wall chaser 
Out of stock
TH-MA 1300