USA

Earmor M32

Photos - Tactical Earmuffs Earmor M32
Videos 20Photos 14
Expecting restock
Tactical headset for hearing protection from constant noise and loud impulse sounds, such as gunshots or explosions. In passive mode, the headphones correspond to an NRR of 22 dB in terms of noise absorption efficiency. The active system consists of two microphones built into the earcups and electronics that process incoming signals and amplify quiet sounds to a comfortable level. If the volume of sounds exceeds 82 dB, the microphones are turned off (response speed less than 1 ms). The Earmor M32 headphones have buttons that allow you to adjust the volume (there are several settings available for different use cases). The headset microphone can be installed on the left or right side. AAA size elements (batteries or accumulators) should be used as power sources. You can connect an external...sound source (walkie-talkie, player or telephone) via the audio input in the headphones; the corresponding cable is included in the kit.
add to listmy lists
Earmor M32
Design and type
on-ear active
Noise Reduction Ratio (NRR)
22 dB
Noise level limit
82 dB
Weight
200 g
Audio input
Headset (microphone)
/ Nexus TP-120 U-174 /
Water protection
IPX5
Helmet compatibility
under helmet
Low profile cups
Foldable
Control
buttons
Power source
2xAAA
Operating time
600 h
Auto switch-off
/ 4 hours /
In the box
case
batteries
audio cable
Official Website
earmor.com
Added to E-Catalog
january 2024
They can be equipped with additional replacement helmet mounts (check with the seller).

Tactical headset for hearing protection from constant noise and loud impulse sounds, such as gunshots or explosions. In passive mode, the headphones correspond to an NRR of 22 dB in terms of noise absorption efficiency. The active system consists of two microphones built into the earcups and electronics that process incoming signals and amplify quiet sounds to a comfortable level.

If the volume of sounds exceeds 82 dB, the microphones are turned off (response speed less than 1 ms). The Earmor M32 headphones have buttons that allow you to adjust the volume (there are several settings available for different use cases). The headset microphone can be installed on the left or right side. AAA size elements (batteries or accumulators) should be used as power sources. You can connect an external sound source (walkie-talkie, player or telephone) via the audio input in the headphones; the corresponding cable is included in the kit.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Video reviews
Filters