Danko 10 10 kW

Chimney single-circuit gas heating boiler of small power (10 kW) for floor mounting. It is positioned as a product of the basic price category, intended for the organization of heating of residential, commercial, domestic or industrial premises up to 80 m2. It does not have its own circulation pump, but can be successfully operated in heating systems with forced or natural circulation of the coolant.

Equipped with an open combustion chamber, therefore it must be installed in separate boiler rooms. It should be noted that for the safe operation of the Danko 10 boiler, installation in a separate boiler room and a complete chimney system with a height of at least 5 m is required, which must meet a number of mandatory fire safety requirements and provide stable natural draft, completely removing gas combustion products.

The main welded tubular heat exchanger is made of high quality steel with a thickness of 3 mm. Its flues are made with numerous fire tubes equipped with screw turbulators. This solution ensures maximum heat extraction from flue gases, rapid heating of the coolant and decent boiler efficiency (up to 92%). The design uses Polish gas automation KAPE and low-flare burners made of heat-resistant stainless steel, which ensure complete combustion of gas and a stable flame even when the gas pressure drops to 635 Pa.