Cooler Master Elite 130 black (RC-130-KKN1)
 | Outdated Product $184.90 Case in a non-standard Cube Case format. The model is a compromise between compact dimensions, chassis capacity and computer system performance. This case is built on a mini-ITX motherboard platform. At the same time, it is possible to install a professional 2-slot video card up to 343 mm long, like the Radeon HD 7990 or GeForce GTX 690. The graphics adapter is placed only vertically. You can put almost any powerful processor on the chassis if you use a water block up to 70 mm high instead of the classic air tower. There is a separate seat for a 120 mm liquid cooling radiator. Computer case Cooler Master Elite 130 differs from its predecessor in a fully perforated facade. The mesh front cover, including the 5.25″ drive blank, keeps the platform well ventilated. Behind the front panel is a...120mm fan. An additional 80 mm impeller is located on the side cover. The power supply is mounted on top, opposite the ventilation channel of the top cover. |
 |
Case in a non-standard Cube Case format. The model is a compromise between compact dimensions, chassis capacity and computer system performance. This case is built on a mini-ITX motherboard platform. At the same time, it is possible to install a professional 2-slot video card up to 343 mm long, like the Radeon HD 7990 or GeForce GTX 690. The graphics adapter is placed only vertically.
You can put almost any powerful processor on the chassis if you use a water block up to 70 mm high instead of the classic air tower. There is a separate seat for a 120 mm liquid cooling radiator. Computer case Cooler Master Elite 130 differs from its predecessor in a fully perforated facade. The mesh front cover, including the 5.25″ drive blank, keeps the platform well ventilated. Behind the front panel is a 120mm fan. An additional 80 mm impeller is located on the side cover. The power supply is mounted on top, opposite the ventilation channel of the top cover.
Elite housing for everyone
Despite the Elite 130 name, Cooler Master's case is more of an affordable and versatile option for those users looking for an inexpensive and compact Cube Case. The interior of the Cooler Master Elite 130 allows you to install a Mini-ITX motherboard, one dual-slot graphics card, three 3.5 format drives or five 2.5 format drives. The HDD/SSD pockets are hybrid here, so there are no problems with installing disk arrays.
Small but roomy
Despite its compact size, the case will quite pull a moderately powerful and hot assembly of a six-core processor and a mid-level RX 580 graphics card. Theoretically, its length should not exceed 343 mm, but such a “paddle” may simply not fit after installing a standard power supply. Perhaps the bottleneck of the Cooler Master Elite 130 is the limitation on the height of the CPU cooler, 65 mm will not let you go wild when choosing. On the other hand, there will be less trouble with the cooling system, since there are a couple of pre-installed fans in the case.
USB is never too much
The front I / O panel has three USB connectors, as well as a headphone output. An extra USB is always a plus, since many Cube Case cases are equipped with only two ports, which is why you need to immediately buy a USB hub in pair with the case in order to connect something else besides a mouse and keyboard. But a replaceable dust filter on the front grill would not be superfluous, but for some reason Cooler Master decided to abandon it. But they did not forget about the rubber feet, which dampen excess vibration from the components.
- Maximum video controller length: 343mm
- Max CPU Cooler Height: 65mm
