Berkut R15
 | Outdated Product $64.32 Type: compressor; Power source: 12 V; Pressure gauge: analogue; Max. pressure (atm): 10; Productivity (L/min): 40; Power cord length (m): 4.8; Hose length (m): 1.2; Cover/case; Size (mm): 167x93x157; Weight (kg): 2.1; |
 |
Berkut R15 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Berkut 2024 - new products, best sales and most actual models Berkut.
Model R15 is transitional between Berkut compressors of the basic level and high-performance electric pumps. It will fit cars, minibuses and small commercial vehicles.
Labor productivity
The powerful engine of the device allows you to inflate a car tyre with a “running” radius R15 from 0.8 to 2.0 atm in just 1 minute. In this case, the pressure readings are displayed on the analogue pressure gauge scale. It is marked up to 7 atm, although the compressor itself can pressurize tyres up to 10 atm. The operation of the autocompressor without a break is possible for 15-20 minutes. In case of premature overheating, it provides a special automatic thermal protection.
Energy supply variability
The power supply to the Berkut R15 engine is established in two ways: from the car cigarette lighter plug from the car interior or from the battery terminals. Fortunately , the network cable of the model has a length of 4.8 m — the device can easily reach the farthest wheel of the car. The length of the flexible hose-air duct of the compressor is 1.2 m. At its tip there is a deflator valve to relieve excess pressure.
Convenience above all else
Under load, the device consumes a decent current (up to 14.5 A), and therefore it is not recommended to use it for a long time paired with small-capacity batteries with the engine turned off. In contrast to the above , it is necessary to note a convenient bag for carrying the compressor with a brief instruction manual right on the inside. Berkut R20 and R24 autocompressors have even more strength to keep large-radius wheels in good shape.
