USA

Ballu ONEAIR ASP-200P

Photos - Recuperator / Ventilation Recovery Ballu ONEAIR ASP-200P
Photos 10
Outdated Product
System type: decentralized; Ventilation type: supply; Mounting: wall; Mounting diameter: 120; ionizer; Air filters: H11; Air pollution sensor; Min. air flow (ventilation), (m³/h): 25; Max. air flow (ventilation), (m³/h): 200; Max. noise level (dB): 45; Control via Internet; Power consumption in ventilation mode (W): 85
add to listmy lists
Ballu ONEAIR ASP-200P
Ballu ONEAIR ASP-200P
System type
decentralized
Ventilation type
supply
Mounting
wall
Mounting diameter
120 mm
Features
ionizer / "cold plasma" /
Air filters
H11
Air pollution sensor
Minimum air flow (ventilation)
25 m³/h
Maximum air flow (ventilation)
200 m³/h
Number of fan speeds
9
Minimum noise level
19 dB
Maximum noise level
45 dB
Minimum operating temperature
-40 °C
Remote control
Control via Internet
Display
Power consumption in ventilation mode
85 W
Mains voltage
230 V
Country of origin
China
Dimensions
575x445x190 mm
Weight
7.2 kg
Added to E-Catalog
september 2020
Optionally, a 1200 W electric heater is installed, this will allow the device to operate at outdoor temperatures down to -40 °C. A compartment for aromatic oils is provided. It is possible to work in recirculation mode. Particle sensor PM 2.5.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Ballu 2024 - new products, best sales and most actual models Ballu.

Powerful ventilator with effective air purification

By the standards of household ventilators, the Ballu ONEAIR ASP-200P has a fairly high performance — up to 200 m³ / h. This is enough to serve premises with a total area of up to 70 – 75 squares, where 3 – 4 people live or work. But "to the fullest" to use this device, of course, is not necessary. It has as many as 9 speeds, which allow you to flexibly adjust the performance of your work, depending on your current needs. And this can be done not only manually. The installation has its own "intelligence". Assessing the degree of air pollution by the built-in PM2.5 sensor, it can independently change the operating mode, switching from ventilation to recirculation or vice versa. The equipment can also be controlled remotely via the Internet. And if you plan to make a full-fledged "smart home", then it's ok to install a CO2 sensor and a 1200 W heating element (they are sold separately as additional equipment) — and then it will be possible to fully automate the control of indoor air quality.

Not a single bacterium will escape

Ballu ONEAIR ASP-200P is not only a ventilator, but also a complete air purifier. Inside its body are filters and devices that clean, improve and disinfect the air flows passing through the device. The system consists of four filter elements (coarse, fine, carbon and "medical" filter class H11). Such a cascade cleans the air of dust, soot, allergens, spores and bacteria. An ionizer and an ultraviolet lamp installed immediately after the filters destroy everything that has leaked through this “sieve”. And so that the resulting air, purified from the dirt and smells of a big city, does not seem too insipid and sterile out of habit, the manufacturer has provided a special compartment for aromatic oils (we recommend lavender for a sound sleep).

It's worth it

The Ballu ONEAIR ASP-200P air handling unit is an expensive “pleasure”, there are many more “low-cost” options on the market. But far from each of the competitors can retain up to 99.9% of pollution, eliminate odours and effectively ventilate large rooms. For an office, apartment or a small private house, such a ventilator is exactly what you need.

Filters
Models
Brands
(system) 
decentralized 
Out of stock
ONEAIR ASP-200P