Ashly NXP1.54

The Ashly nXp1.54 is a 1500-Watt @ 4 Ohm, 4-channel network power amplifier with DSP and programmable outputs.Ashly's line of nX Power Amplifiers feature lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The nX amplifiers are available in three product families designed to meet the most d... moreemanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.Ashly nXp Series amplifiers add 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking. Plus precision load impedance monitoring on each amplifier channel output.Ashly nXp1.54 Features:4-channel high-output, lightweight amplifier with programmable output on each channel (Hi-Z or Lo-Z, selected via rear panel DIPswitches)Power-saving, Energy Management System (Ashly EMS) automaticFront panel power switch and level controls (can be disabled for security)Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)Neutrik® Combo XLR–1/4" TRS jack plus Euroblock input connectorsNeutrik® speakON® twist locking loudspeaker connectors for security, safety, and reliabilityRear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker outputconfigurationRemote DC level control on each input channelNeutrik® powerCON® detachable AC mains connectorSwitch mode power supply automatically detects 120V or 240V AC operationExtensive protection circuitry, continuously variable cooling fansMultiple independent internal power supplies provide increased channel separation and reliabilityDynamics, gain, equalization, 2x4 matrix mixer, crossover, delay, metering, and signal generator functions for test and noise masking applicationsPrecision swept load impedance monitoring of each amplifier channel for quick and easy diagnosis of sound system problems remotely via EthernetAshly nXp1.54 Specifications:Max Output Power per Channel:2 Ohms: 1500W4 Ohms: 1500W8 Ohms: 1250WLow Z Output Bridge Mode:4 Ohms: 3000W70/100V Output:70V: 1500W100V: 1250WTotal Power Draw:Sleep Mode:250 (8 Ohms loadInput High Pass Filter: 80Hz 2nd orderDistortion (SMPTE, typical):111dBFrequency Response: 20Hz-20kHz, +/-0.05dBBalanced Input Connector: Euroblock 3.5mm, 1/4" TRS and XLR Combo jackInput Impedance: 10K OhmsMaximum Input Level: +21dBuSpeaker Output Connector: Neutrik® speakON®Control Network: Compatible with standard 100MB EthernetAUX Output Connector: Balanced Euroblock 3.5mmAUX Output Maximum Level: +21dBuRemote Standby Contact Closure: Euroblock 3.5mm, close contact to GND for standby modePreset Recall Contact Closure: Euroblock 3.5mm, close contact to GND for preset 1-4 recallData Connection: Euroblock 3.5mm - Gnd, +18V,

The Ashly nXp1.54D is a 1500-Watt @ 4 Ohm, 4-channel network power amplifier with DSP and programmable outputs. This model comes with Ashly’s OPDante® module installed will be capable of transmitting Dante® digital audio from their post-DSP input channel signals. nXp amplifier inputs are available to Dante® Controller as individua... morel digital audio sources (transmitters) for use with other Dante® devices.Ashly's line of nX Power Amplifiers feature lightweight, energy efficient Class D switching amplifier technology combined with a switch mode power supply. The nX amplifiers are available in three product families designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. Ashly nXp Series amplifiers add 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking. Plus precision load impedance monitoring on each amplifier channel output.Features4-channel high-output, lightweight amplifier with programmable output on each channel (Hi-Z or Lo-Z, selected via rear panel DIP switches)Power-saving, Energy Management System (Ashly EMS) automaticFront panel power switch and level controls (can be disabled for security)Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)Neutrik® Combo XLR–1/4" TRS jack plus Euroblock input connectorsNeutrik® speakON® twist locking loudspeaker connectors for security, safety, and reliabilityRear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configurationRemote DC level control on each input channelNeutrik® powerCON® detachable AC mains connectorSwitch mode power supply automatically detects 120V or 240V AC operationExtensive protection circuitry, continuously variable cooling fansMultiple independent internal power supplies provide increased channel separation and reliabilityDynamics, gain, equalization, 2x4 matrix mixer, crossover, delay, metering, and signal generator functions for test and noise masking applicationsPrecision swept load impedance monitoring of each amplifier channel for quick and easy diagnosis of sound system problems remotely via Ethernet.SpecificationsMax Output Power per Channel:2 Ohms: 1500W4 Ohms: 1500W8 Ohms: 1250WLow Z Output Bridge Mode:4 Ohms: 3000W70/100V Output:70V: 1500W100V: 1250WTotal Power Draw:Sleep Mode:Standby Mode: 40WIdle (no signal): 100WCurrent Draw 120VAC Mains:Sleep Mode: 0.1AStandby mode: 1.30AIdle (no signal): 1.85AMax. Current Draw: 16.0AThermal Dissipation (BTU/hrall channels driven):Sleep Mode:Standby Mode: 238Idle (no signal): 340Typical (1/8 max. power): 1700General Specifications Notes: 0dBu = 0.775 VRMSVoltage Gain: Selectable at 26dB, 32dB, 38dB,