Aerocool CS-1102 without PSU
 | Outdated Product $387.00 A relatively inexpensive gaming case from Aerocool with a fairly "rare" design — in this platform there is not even a hint of the trends of modern computer fashion. So, this is a mid-sized Mid-Tower case, which in the old fashioned way has the top location of the power supply, while all memory drives are placed in a high front rack. Nevertheless, this model has good potential for building a powerful gaming system. The chassis is tailored for an ATX motherboard, the length of discrete video can reach 375 mm, and a tower up to 150 mm high is suitable for cooling the central processor. The Aerocool CS-1102 case has three seats for installing air cooling: you can use coolers in the front, side and rear. One fan with an 80 mm impeller is included in the standard package, it is installed on the...rear panel. At the very top of the A-pillar there is a place for mounting a 5.25" optical drive. On the front panel, which is finished in glossy plastic, there is a corresponding plug for a 5.25" device. Additionally, the rack has space for a trio of 3.5" HDDs and one 2.5" SSD. The front panel is removable, at its base there is a plastic insert, which can be used to limit and increase the flow of fresh air into the system. |
 |
A relatively inexpensive gaming case from Aerocool with a fairly "rare" design — in this platform there is not even a hint of the trends of modern computer fashion. So, this is a mid-sized Mid-Tower case, which in the old fashioned way has the top location of the power supply, while all memory drives are placed in a high front rack. Nevertheless, this model has good potential for building a powerful gaming system.
The chassis is tailored for an ATX motherboard, the length of discrete video can reach 375 mm, and a tower up to 150 mm high is suitable for cooling the central processor. The Aerocool CS-1102 case has three seats for installing air cooling: you can use coolers in the front, side and rear. One fan with an 80 mm impeller is included in the standard package, it is installed on the rear panel.
At the very top of the A-pillar there is a place for mounting a 5.25" optical drive. On the front panel, which is finished in glossy plastic, there is a corresponding plug for a 5.25" device. Additionally, the rack has space for a trio of 3.5" HDDs and one 2.5" SSD. The front panel is removable, at its base there is a plastic insert, which can be used to limit and increase the flow of fresh air into the system.
