Crafter RPI-250

The Weller soldering tip MT1 has a diameter of 4.5 mm. It is straight and nickel-plated and suitable for the Weller SP25NEU soldering iron.

E6013 steel electrodes are ideal for all-purpose and all-position welding. These rods are great for light gauge metal, sheet metal, duct work and all types of mild steel fabrication! These rods produc more→e excellent wetting action, yielding smooth and flat beads with steady arc with either AC or DC operations. Use these electrodes on mild steel where ease of operation and good appearance is required.

It consists of 60 percent tin and 40 percent lead. This rosin core solder 60/40 has a melting point of 374 degree Fahrenheit. Use it to repair electronics such as radios, TVs, VCRs and stereos and als more→o motors and wires.

Welding Goggles, Lift Front, Welding goggles featuring 2 inch x 4-1/4 inch No.5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and more→allows ample room to fit over regular eye glasses. Designed for gas welding only. Provides 99.9 percent UV protection.

The most common tips you will use in electronics projects are the conical tip and the chisel tip. Conical Tip Used in precision electronics soldering because of the fine tip. Because of its pointed en more→d, it's able to deliver heat to smaller areas without affecting its surroundings.

"E7018 mild steel ""Low Hydrogen"" welding electrodes easily produces quality results on smaller amperage DC or higher amperage AC welders. It is suitable for all positions on hardenable steels where more→no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod. The low hydrogen content reduces cracking and peeling of the weld material. Use for field erections, steel structures, frames, trailer hitches and chassis."