Zenet ZET-503 1.2 kW

Rotary system

The floor carbonic infrared heater Zenet ZET-503 is an advanced heating device of a new generation. The model is designed for rapid heating of premises with thermal radiation, as close as possible to the solar spectrum. The vertically oriented plastic body of the device is mounted on a disk stand, relative to which it can rotate in the angular range of 180°. This method of operation allows you to quickly distribute heat throughout the area of \u200b\u200bthe room. The front mesh grill covering the heat emitters partially protects against accidental contact with heated elements.

Without thermostat

The heating elements in the device are 2 vacuum quartz tubes, inside of which a spiral of carbon-containing fibre is enclosed. These heaters with a total power of 1.2 kW have a high heat output, which, with small dimensions of 65x35x16.5 cm, successfully replaces more powerful and energy-hungry convectors and oil heaters. The device has 2 power levels, to set which you need to turn the dial on the top of the case. This model did without a thermostat, but was equipped with an overheating protection temperature sensor and a shutdown function in case of a fall or excessive tilt. The tightness of the heating tubes protects them from moisture penetration, which makes it safe to use the devices in a damp room. Another advantage of the device is the preservation of a healthy level of humidity in the room: after all, infrared radiation does not heat the air, but objects located at a distance of 3-4 m.