Thermex Surf Plus 6000
![]() | Outdated Product Type: tankless; Energy source: mains; Power source: 230 V; Power consumption (W): 6000; Performance (Δt ~25 °C) (L/min): 3.4; Heating elements: 1; overheat protection; dry heating protection; Pipe connection: installation dependent; Dimensions (cm): 18x13x6.8; E-Catalog uses affiliate links compensated by our partners. |
Thermex Surf Plus 6000 | ||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Thermex 2026 - new arrivals, bestsellers, and the most relevant models Thermex.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Thermex 2026 - new arrivals, bestsellers, and the most relevant models Thermex.

Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters

Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
i bought it for a shower (4.5 kWh), but according to the specs, the performance is 2.5 liters per minute at 40 degrees, which is actually slightly warm water. There are descriptions of showerheads available online (which are not included), generally, it turns out that an average showerhead is designed for 15 liters per minute, a super economical one for 7 liters per minute, the device does not even provide half the water flow rate needed for heating, warm water barely flows at 2.5 liters per minute, and increasing the pressure even to 3 liters per minute makes it simply cold. Thus, this device is not suitable for a shower at all, but only for a sink/basin with minimal water supply to allow heating. All descriptions claiming it is for shower use are false/marketing gimmick. not identified, in the kitchen there is a flow directly on the tap, the power is weaker, and the water is hot lack of performance specifically for embedding in a water supply system |
Add Review
We recommend




