AEG RMC 55
Outdated Product $873.00 Type: tankless; Energy source: mains; Power source: 230 V; Power consumption (W): 5500; Performance (Δt ~25 °C) (L/min): 2.75; Heating elements: 1; wet heater; thermostat; water flow regulator; overheat protection; Pipe connection: bottom; Dimensions (cm): 36х20х10.6; |
AEG RMC 55 | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog AEG 2024 - new products, best sales and most actual models AEG.
Before buying always check characteristics and configuration of product with online store manager
Catalog AEG 2024 - new products, best sales and most actual models AEG.
Additional features water heater AEG RMC 55:
The instantaneous water heater RMC 55 with electronic control system heats the water as it passes through the appliance. The heating switches on automatically when the minimum flow volume is exceeded. The water heater is equipped with a safety thermal relay. When overheated, the heating is switched off. The outlet temperature is lowered by increasing the flow or adding cold water. The hot water capacity depends on the power of the device, the temperature of the cold water and the volume of the flow.
- Connection to a single-phase network with a voltage of 230 V
- Ability to work with water pressure in the water supply system from 0.18 bar
- Model RMC 45 — power 4.5 kW
- Model RMC 65 — power 6.5 kW
- Model RMC 75 — power 7.5 kW
- Model RMC 85 — power 8.5 kW
The instantaneous water heater RMC 55 with electronic control system heats the water as it passes through the appliance. The heating switches on automatically when the minimum flow volume is exceeded. The water heater is equipped with a safety thermal relay. When overheated, the heating is switched off. The outlet temperature is lowered by increasing the flow or adding cold water. The hot water capacity depends on the power of the device, the temperature of the cold water and the volume of the flow.