Wire Detectors

NEW! – Target Control (TC) Mode locates the center, edges, and direction of wood studs, and not metal, up to ¾ in. (19 mm) deep behind surfaces. Identifies ‘safe-to-drill’ zones between adjacent drywall screws, nails, or protector plates
StudScan Mode locates center, edges, and direction of wood and metal studs up to ¾ in. (19 mm) deep
DeepScan Mode doubles the scan depth of wood and metal studs up to 1½ in. (38 mm) deep
MetalliWarning Indicator turns on when metal objects are detected in all modes
ColorTrip Display illuminates pale blue in TC mode, green in DeepScan mode, and red to alert the presence of live AC electricity

The item is Zircon StudSensor Pro SL Edge Finder Deep-Scanning Stud Finder with SpotLite Pointing System
Used for Test & Measurement, Rotary Lasers
The product is manufactured in China
zStud Scan mode locates the edges of wood or metal studs up to ¾ inch (19 mm) deepDeepScan mode doubles the scanning depth to 1½ inches (38 mm)
Red LEDs light up every time a stud edge is approached.
Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached.
Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location.

Locates the edges and center of wood or metal studs up to 1 1/2-Inches (38 mm) deep
Scans for metal and live AC wires
Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2" deep

Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces
Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe)
Shows the depth of metal from the surface in both inches and centimeters
Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble
Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more

Locates the edges of wood or metal studs up to 3/4-Inch (19mm) deep
WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51mm) deep
Updated SpotLite Pointer shines an arrow-shaped light on the wall to mark the target
All-new Patent-Pending Pinch Grip Design
Patented TruCal technology indicates when the tool is calibrated and ready

Quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings up to a depth of 1-1/2 inch. The SpotLite Pointing System shines a beam of light on the wall to identify the target, and WireWarning detection indicates live AC voltage. TruCal technology calibrates to any wall's density and a steady green LED light alerts the user when the tool is calibrated and ready to scan. The tough, ergonomic housing withstands everyday jobsite use.

STUD SENSOR 200
STUD SENSOR 200
STUD SENSOR 200
STUD SENSOR 200
STUD SENSOR 200

Wall stud and electrical wire finder
LCD screen with center find
One pass technology
Audible indicators alert you when studs and wires are detected
Reads depth up to 3/4"

STUD SENSOR 100
STUD SENSOR 100
STUD SENSOR 100
STUD SENSOR 100
STUD SENSOR 100
Pocket-size stud sensor detects and locates studs and joists up to a 3/4" depth
LED display and buzzer indicates stud edge
High-impact, ergonomically-designed ABS case includes pencil notch for pinpoint marking
Calibrates automatically for surefire accuracy. LED's include low battery warning
Limited Lifetime Warranty

Get dependable detection of wall studs with this durable STANLEY Magnetic Stud Finder. Maneuver with ease with its 1-3/8 in. x 1-3/8 in. size as you quickly locate steel nails and screws used to hold drywall to studs. The stud finder’s notched base allows the user to conveniently mark spots once studs are found.

It is an adapter
Durable and durable material
Easy to use
Brand: Stanley

Commercial High sensitivity and large radar antennas that are embedded in concrete, conductive wires, and resin pipes with high precision detecting deep into the wall
Maximum detection depth 7.1 inches (180 mm) (dry concrete rebar, φ0.4 inches (10 mm) or higher)
Full color LCD and backlight Excellent visibility with large 4.1-inch LCD monitor
You can choose between two modes depending on the burial state. Single Detection Mode: For straight burial objects such as rebars. Intuitively detect burial Multi-Detection Mode: Easily detect objects that pass diagonally through CD pipes, PF tubes, etc
14.4 V, 18 V, sliding Li-ion battery specifications

DW OPP NO2 1-1/2IN STUD
DW OPP NO2 1-1/2IN STUD
DW OPP NO2 1-1/2IN STUD
DW OPP NO2 1-1/2IN STUD
DW OPP NO2 1-1/2IN STUD

Stud_Finder_Type - Internal Capacitor-Edge
Power_Sources - 9V Battery sold separately
Pre-consumer_Recycled_Content_Percent - 0%
Post-consumer_Recycled_Content_Percent - 0%
Total_Recycled_Content_Percent - 0%

Display: 3.5 inch TFT color LCD
Display Resolution: 320 x 240 pixels
Camera Cable Minimum Bending Radius: 1.0 inch (25 mm)
Camera head diameter: 8.5mm
Power supply: 4 x AA alkaline batteries
*Compatible with Bosch professional 10.8V lithium-ion battery (model number: A1020LIB)
Weight: 21.3 oz (600 g)
Standard Accessories: Camera cable 0.3 inch (8.5 mm) (total length 4.9 ft (1.2 m), tip tool set (hook, magnet, mirror), micro USB cable, micro SD card (4 GB), alkaline batteries x 4 (for confirming operation), carrying bag
Product specifications and appearance may change without prior notice in order to make improvements

Cleaning