Submersible (Drainage) Pumps

Constructed of high quality, corrosion resistant 304 stainless steel, Oil lubricated double mechanical shaft seal, Air filled, continuous duty motors rated for up to 20 starts per hour, Built-in thermal protection with automatic reset (Single Phase Only), Built to operate with full or partial submergence (Optima pumps are available with an optional Low Suction Device), Vertical discharge allows pumpage to carry heat away from the motor

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation, NPT thread discharge, Double mechanical seal with viton elastomers, Shielded pre-lubricated ball bearings, Single channel impeller, Thermal overload protection QDC system

This pump has a 2" NPT threaded discharge

EBARA 50DWXU61.52 DOMINATOR Manual Sewage Pump, 2HP, 3 x 230

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation, NPT thread discharge, Double mechanical seal with viton elastomers, Shielded pre-lubricated ball bearings, Single channel impeller, Thermal overload protection QDC system

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation Automatic float switch, NPT thread discharge, Double mechanical seal with viton elastomers Shielded, pre-lubricated ball bearings Single channel impeller Thermal overload protection QDC system

Key Features: Constructed of high-quality, corrosion resistant 304 stainless steel. Motor is 2 pole submersible, rated continuous duty 104°F maximum fluid temperature continuous operation, fully submerged. 140° F intermittent operation, Automatic float switch, NPT thread discharge, Double mechanical seal with viton elastomers, Shielded pre-lubricated ball bearings, Single channel impeller, Thermal overload protection QDC system

For flanged discharge change the 'x' in part number to 'f' and add &25 to the price.

Easy Flo EF2300

CONNECTS: to 1-1/4-inch or 1-1/2-inch sump pump discharge pipe INCLUDES: ABS and rubber construction with stainless steel clamps FEATURES: Durable and efficient Rubber slip fit connections FULL-FLOW: Design maintains performance of sump pump WEIGHTED: Flapper valve insures seal to prevent pump cycling

PUMPS: Up to 108 GPM / 6500 GPH, with a maximum vertical lift of 37-feet HEAVY-DUTY: Cast iron and stainless steel construction provides ultimate durability and longevity CAST IRON: Rugged impeller prevents clogging and will handle up to 1/ 2 in. solids FEATURES: Vertical float switch with piggy-back plug tested to over 3 million on/off cycles WARRANTY: 10-Year

**POWERFUL PERFORMANCE** Maximum discharge flow rate 42 GPM / 2500 GPH @ 0 ft. of vertical lift. 31 GPM / 1850 GPH @ 10 ft. and engineered for reliable performance on utility and multi-purpose applications requiring high lift performance (Maximum lift up to 28 ft.). **ENGINEERED EFFICIENT** Efficient, PSC motor features premium 100% solid copper motor windings and dual o-ring motor seals for years of reliable on-demand water removal. **CLOG-FREE, FAST WATER REMOVAL** Fully submersible utility multi-purpose water transfer/removal pump, with bottom suction design, and serviceable intake screen, removes water fast, down to 1/2 in. of surface and passes up to 3/8 in. solids, to minimize clogging.…

The 00752078 is a genuine Bosch Sump w/ Drain Check Valve. The Bosch 00752078 Sump w/ Drain Check Valve fits the following brands of dishwashers: Bosch The Bosch 00752078 helps to control the flow of water into the drain pump of your dishwasher. The 00752078 replaces: 752078 If the Sump is broken or cracked, it can mean that leaks and further damage are occurring. Replace a damaged sump right away to keep your machine running smoothly. It is recommended to either refer to your appliance service manual, contact your appliance manufacturer, or contact a service professional to validate the needed part number for your appliance prior to purchasing.