Submersible (Drainage) Pumps

Features 2 inches NPT discharge capable of handling up 2 inches solid 3/4 inches solids
Comes with 115-volt, 1/2 horsepower rating
Features cast iron housing with oil filled motor. includes 10-feet power cord
WCC17-20.50
Cast Iron, Oil-filled motor
Oil-filled motor
10-ft power cord included
1/2 horsepower

Liquid type: clean water
Uses: domestic
Applications: water supply systems, pressure systems, irrigation pumps
typology: surface
Family: peripheral
Performance Range: Flow rate up to 11 GPM Head up to 130ft.
Temperature of the liquid from -10 °C to +60 °C
Ambient temperature up to +40 °C (+50 °C for PK 60)
Manometric suction lift up to 8 m
working pressure: – 6 bar for PK 60, PK 60-MD, PK 65 – 7 bar for PK 70, PK 80 – 10 bar for PK 90, PK 100, PK 200, PK 300

Robust pre-filter.
Click-System.
Mesh width: 5 mm.

Easy to Install
Wet Rotor Design
Single Stage Motor
Heating systems
Open and closed systems

TERMINAL BOX FOR UPC50-160,UMC80-80

TERMINAL BOX FOR UMC50-80,UMC65-40

TERMNAL BOX FOR UPC65-160

TERM BOX UMC50-80,UMC65-80,UMC80-80

HEAD FOR UPS40-160/2 115V 1PH

1-phase motor
Circulator pump with relay
Rated Voltage: 230V. Frequency: 60 Hz
Flange Standard: USA Oval. Pipe Connection: GF 40/43
Pressure Stage: 145 PSI. Max. Operating Pressure: 145.04 PSI

Système automatique pratique : une électronique intégrée avec pressostat active la pompe en cas de besoin (p. ex. activation de la chasse d'eau) puis l'éteint automatiquement
Résistante : la pompe est fabriquée à partir de matériaux de haute qualité, ce qui garantit une longue vie et un fonctionnement sûr sous l’eau
Facile à utiliser : un filin de suspension solide sur la pompe permet de la mettre facilement dans l'eau ou, si nécessaire, de la remonter, une poignée pratique permet un transport confortable
Universellement compatible : le raccord fileté intégré de la pompe répond aux normes internationales et peut être facilement raccordé aux systèmes / tuyaux usuels
La livraison com…

Dirty Water Submersible Pump 20000
Dirty Water Submersible Pump 20000 Gardena
Gardena. The products of this brand are made with the best quality materials.

Original Gardena System parts: For the transition from water pumps to Original Gardena System hoses
Connecting thread: 42 mm (G 5/4 Inch) / 33.3 mm (G 1 Inch)
Simple connection: pump is practical and easily connected to the hose system Original Gardena
Scope of delivery: 1x Gardena Submersible Pump Connector 42 mm

Range of application: The pump is suitable for the discharge or pumping of clean water (max. 5 mm dirt particles) from tanks, water tanks, shafts or garden wells.
Power - The 220 watt motor with thermal overload protection allows a delivery capacity of 7,500 litres per hour with a maximum supply pressure of 0.6 bar.
Head - The submersible pump can pump water up to a height of 6 m. During water drainage, the pump provides a shallow suction up to a residual height of 5 mm of the water level.
Efficient float switch - The infinitely adjustable float switch switches the pump on and off automatically at a preset water level.
Robust pump - The housing of the submersible pump is made of impact-resistant …