Climbing Gear

Unlike adhesive sports tapes, our medical grade, self-adherent, water resistant and breathable magic hand tape sticks to itself rather than the skin with gentle pressure application. Perspiration and water will not loosen the cohesive bond and the porosity permits air circulation. You can snip the tape away easily and cleanly without leaving any sticky residue and uncomfortable pulling of skin or hair.

SLING LANYARD / W2016 Two-layer webbing with sewed eyes produced from two items, one inserted into second one outer hollow webbing protects inner red load bearing strap in case of outer webbing damage the user is immediately advised on danger and hazard connected with further use by seeing the red colour of inner strap SLING LANYARD has to be used as a component of a fall arrest system the lanyard is tested according to EN 354 standard for lanyards and according to EN 795B standard for anchor devices color marking according to length also available in black only Code : length :   color marking : strength : W2016 X060 60 cm • 24 in yellow 22 kN W2016 X080

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

Most pitons rely on compression of the metal and leverage from directional pull for their holding power. The U shape of the shaft on the Corner piton adds an additional holding force by creating spring tension when the piton is driven into a crack proportionately smaller than its width. Product name Weight Total length Blade length Thickness Material g oz mm in mm in mm in EN 569 CORNER N.1 56 2.0 105 4,13 70 2,76 12 0,47 Hardened Steel Progression CORNER N.2 65 2.3 110 4,33 75 2,95 16 0,63 Hardened Steel Progression CORNER N.3 95 3.4 145 5,71 110 4,33 18 0,71 Hardened Steel

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Pear shaped HMS carabiner with keylock closure and screw gate. Closure indicator pictogram engraved on the gate. Weight 86 g Material Light alloy opening 22 mm Major axis strength 24 kN Minor axis strength 8 kN Open strength 8 kN Length 120 mm Width 76 mm Standard CE - EN12275/362 - UIAA Type H/B

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

It has a higher strength-to-weight ratio, is less susceptible to UV degradation and has greater abrasion resistance, making Dynatec an ideal material for creating lightweight quickdraws. It also absorbs less water than nylon – an important consideration for winter climbing. The sling's slim profile allows it to be used for narrow threads and to sit better on marginal spike placements.

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Pear shaped HMS carabiner with keylock closure and screw gate. Closure indicator pictogram engraved on the gate. Weight 86 g Material Light alloy opening 22 mm Major axis strength 24 kN Minor axis strength 8 kN Open strength 8 kN Length 120 mm Width 76 mm Standard CE - EN12275/362 - UIAA Type H/B

It has a higher strength-to-weight ratio, is less susceptible to UV degradation and has greater abrasion resistance, making Dynatec an ideal material for creating lightweight quickdraws. It also absorbs less water than nylon – an important consideration for winter climbing. The sling's slim profile allows it to be used for narrow threads and to sit better on marginal spike placements.

A clean nose stops your keys catching, I-Beam construction brings weight down to a miniscule 8 grams, and colour anodising means the XSRE stands out from the crowd. It even rates to 4kN, more than strong enough for any non-PPE function you can think of.

Wallnuts can be placed in two different orientations, allowing a single nut to cover a range of cracks. They are tapered across both their face and sides, helping them sit better in cracks that are rarely parallel sided. Grooved faces reduce weight, help the nut seat better in cracks, improve security in shallow placements, and resist lifting out when a leader moves past them. Wallnuts are mounted on wires that are stiff enough to allow overhead placements, while flexible enough to reduce the chance of lifting out. They are colour coded to correspond with the rest of our protection range, and to give quick and easy selection of the correct size from your harness. Wallnuts are the basis

Its shape provides effective centring of loads and the fully rounded rope bearing areas increase carabiner and rope longevity. A keylock nose allows snag-free operation. Also available as a four-colour pack. The colour options help to quickly differentiate between equipment.

Keylock nose oval carabiner with screw gate closure, its symmetrical shape helps to keep components of a system aligned. Closure indicator pictogram engraved on the gate. Weight 73 g Material Light Alloy opening 18 mm Major axis strength 21 kN Minor axis strength 8 kN Open strength 6 kN Length 110 mm Width 61 mm Standard CE - EN12275/362 - UIAA Type X / B

A steel body carabiner specifically designed for use in gyms and outside on high traffic routes and anchors. The smooth action and wide opening of the aluminum alloy bent gate combine with the keylock closure to make clipping and cleaning a breeze. A special keeper pin held in place by a bolt locks the carabiner on draws to help ensure proper orientation and prevent theft (hex wrench included). Large opening and keylock nose for easy clipping Steel body for durability, aluminum gate for smooth clipping Zinc plating helps prevent rust in humid environments Special keeper pin ensures proper orientation and prevents theft Height (mm) : 99 Width (mm): 58 Gate Opening (mm): 24 Major

Keylock nose oval carabiner with screw gate closure, its symmetrical shape helps to keep components of a system aligned. Closure indicator pictogram engraved on the gate. Weight 73 g Material Light Alloy opening 18 mm Major axis strength 21 kN Minor axis strength 8 kN Open strength 6 kN Length 110 mm Width 61 mm Standard CE - EN12275/362 - UIAA Type X / B

Screwgate HMS carabiner which is well adapted to work with your belay device. It can be used comfortably with 2 ropes at a time, with little risk of the two strands overlapping each other during a fall. The wide end has room for 2 ropes sliding side by side and does not generate any friction on the sides of the karabiner when the rope is loaded or when a leader’s fall is held. Keylock system USES Belaying and abseiling. Name Be Safe Standard EN 12275 H | EN 362 B Weight 66 g Dimensions 99x69mm Opening 21mm Resistance Major Axis 28 kN (2800 kg) Resistance Minor Axis 8 kN Resistance Gate Open 8 kN

Screwgate HMS carabiner which is well adapted to work with your belay device. It can be used comfortably with 2 ropes at a time, with little risk of the two strands overlapping each other during a fall. The wide end has room for 2 ropes sliding side by side and does not generate any friction on the sides of the karabiner when the rope is loaded or when a leader’s fall is held. Keylock system USES Belaying and abseiling. Name Be Safe Standard EN 12275 H | EN 362 B Weight 66 g Dimensions 99x69mm Opening 21mm Resistance Major Axis 28 kN (2800 kg) Resistance Minor Axis 8 kN Resistance Gate Open 8 kN

Screwgate HMS carabiner which is well adapted to work with your belay device. It can be used comfortably with 2 ropes at a time, with little risk of the two strands overlapping each other during a fall. The wide end has room for 2 ropes sliding side by side and does not generate any friction on the sides of the karabiner when the rope is loaded or when a leader’s fall is held. Keylock system USES Belaying and abseiling. Name Be Safe Standard EN 12275 H | EN 362 B Weight 66 g Dimensions 99x69mm Opening 21mm Resistance Major Axis 28 kN (2800 kg) Resistance Minor Axis 8 kN Resistance Gate Open 8 kN

HECTOR screw / K0114EE00  - blue Large versatile pear-shaped HMS carabiner with screw gate designed for multiple uses mainly for belaying or anchoring when working at heights due to high strength and large gate opening it is mainly used as a central carabiner when anchoring pear-shaped basket facilitates belaying with the Münter hitch or other belay devices angled snag free  Keylock  nose for smooth clipping and unclipping maneuvers rough notches on the screw locking sleeve for easy manipulation even with gloves each carabiner is individually tested for a strength of 10 kN large rope bearing area for better rope glide and reduced wear on the carabiner gate opening and