Computer Cases

Aluminum Sand Blasting appearance design Entire Coating black internally design Compatible with 280 mm VGA card Supports to max. 135mm height CPU cooler Type C*1 + USB3.0*1 All Magnetic dust filters Supports to install 2×2.5'HDD + 2×3.5'HDD Option to install 200mm×1 or 1×12025 or 1×14025 fan at front Option to install 1×120 fan at bottom, and 2×9025 at rear Option to install 200mm or 120mm or 140mm radiator at front Mesh front panel for Ultra high air flow design Compatible with ATX POWER SUPPLY

Samco UFOII White Case with 120mm RGB Case Fan With 1 Year Warranty

Steel / Tempered Glass ATX Mid Tower 2 x USB 2.0 / 1 x USB 3.0 / HD Audio In/Out Front Ports 3 x 120mm ARGB LED fan x front (Pre-installed), 1 x 120mm ARGB LED fan x rear(pre-installed) provide great cooling and dynamic cyber gaming atmosphere 2 ways to control RGB LED strip/fan lighting: Either by Manual RGB LED Button on Top I/O Panel; or if your motherboard has 5v addressable connector, this case has ARGB 5V/3 pin header ready to SYNC w/your motherboard to control ARGB lighting Water cooling

Water cooling ready - Top, MB side and Front can fit up to 360mm water cooling radiator Front/Top/Left and Right side panel too-free disassembling structure - provide fast installation with no hassle Bottom mounted IO ports - 2x USB 3.0 and 1x Type C for up-to-date high speed data transfer Advanced cable management design - 32mm Advanced bottom-mounted power supply design Magnetic dust filter at top / bottom - easy clean Support up to 180mm CPU cooler Support up to 400mm VGA card. Horizontally o

Steel / Tempered Glass ATX Mid Tower 2 x USB 2.0 / 1 x USB 3.0 / Audio In & Out (HD) Front Ports 1 x Halo LED Ring fans x rear (Pre-installed) Water cooling ready - Front can fit up to 280mm water cooling radiator Advanced cable management design Support up to 320mm VGA card

Steel ATX Mid Tower 2 x USB 2.0 / 1 x USB 3.0 / HD Audio Front Ports 3 x 120mm Fans (Pre-Installed)

Water cooling ready - front can fit up to 360mm water cooling radiator Advanced cable management design-25mm Advanced bottom-mounted power supply design Top mounted IO ports - USB 3.0 for up-to-date high speed data transfer 6 fans capability provide great cooling performance Magnetic dust filter at top - easy clean Support up to 162mm CPU cooler Support up to 330mm VGA card

Sleek Front Panel with Power On Button 5x 3.5' Hotswap Bays 4mm Aluminum Front Panel Support 6.0Gb/s SATA/SAS HDDs Compatible with Flex Power Supply Heavy Duty SECC Construction

*Motherboard. Supports standard ITX/MICROATX motherboards Size: Any size motherboard within the range of 245×245mm can be supported. *Power Supply: Support SFX power supply or ATX standard power supply. Support SFX power supply or ATX standard power supply Built-in 0.75 sq. ft. power adapter cable supports 1000W power supply. ATX/SFX dual-mode power supply bracket is standard. *Graphics card. Supports graphics cards up to 310x135x64mm in length and width. -If the graphics card power supply port

*Motherboard. Supports standard ITX/MICROATX motherboards Size: Any size motherboard within the range of 245×245mm can be supported. *Power Supply: Support SFX power supply or ATX standard power supply. Support SFX power supply or ATX standard power supply Built-in 0.75 sq. ft. power adapter cable supports 1000W power supply. ATX/SFX dual-mode power supply bracket is standard. *Graphics card. Supports graphics cards up to 310x135x64mm in length and width. -If the graphics card power supply port

SPCC Mid Tower USB 3.0 x 2, HD Audio x 1 Front Ports 2 x 3.5', 2 x 2.5' or 1 x 3.5', 3 x 2.5' Internal 3.5' Drive Bays Three Pre-Installed Hydraulic Bearing 120MM ARGB Lite Front Fans *Snow Tempered Glass Panel Sync with Motherboard RGB Software Mesh Front Panel Build-in PSU Cover 3 Year Warranty

Wall-mount open frame rack stores 12U of 19-inch rack equipment up to 22 inches deep and swings open for maximum accessibility. 12U 2-post rack accommodates 19 in. rack equipment up to 22 in. deep. Hinged front provides easy rear access to cables and equipment Keyhole mounting slots are spaced 16 in. apart to match standard wall stud placement Maximum load capacity is 150 lb. Assembly hardware is included

Spacious Chassis: This huge 4U server case comes with 15 internal 3.5' HDD & 5 2.5" SSD bays. Expandable & E-ATX Compatible: 7 PCI expansion slots and E-ATX compatibility gives you growth options for all of your needs. Exceptional Cooling: 5 pre-installed cooling fans provide excellent airflow and heat protection. Support 360mm AIO liquid CPU cooler Desired Features: Front panel LED indicators for power, HDD status monitoring allow quick, easy visual assessment. Additional utility with 2 USB 3.0

3 External 5.25' Drive Bays 1 120mm Fans

3 External 5.25' Drive Bays 1 120mm Fans

3 External 5.25' Drive Bays Rear: 2 x 80 mm (Option) 80mm Fans Front: 1 x 120 mm (120 x 25 mm), PWM 120mm Fans

Backplane support for 8 port SAS / SATA drives and 12 Gb/s Mini-SAS HD SFF-8643 + SGPIO Supports eight 2.5'/3.5' SAS/SATA HDD/SSD hot-swap trays Includes three 80mm x 38mm hot-swappable PWM fans Independent drive status LED Supports E-ATX or SSI-EEB motherboards Supports seven low profile PCI / PCIe slots Auto lock handle designed to easily fit and secure into server racks

Open Layout: Great for performance systems and optimal custom PC gaming builds, thanks to the tower's expansive layout. E-ATX Support: A versatile tower compatible with E-ATX 12 x 13in larger form factor motherboards and ATX and Micro ATX motherboards. Storage Galore: Plenty of HDD/SSD storage space available, including vertical mounted HDD tray bar, dual-slot vertical GPU mounting expansion slots, and dual PSU mount support on top and bottom. Keep Your Cool: Room for up to 7 case fans. Tower co

MK470 WIRELESS KEYBOARD & MOUSE DEU

CH - CENTRAL

CH - CENTRAL

Supports M/B size up to 12' x 10.5' Features tool-less 3.5' HDD tray Built-in up to two front access USB3.0 ports