Power Tool Accessories

The Bernzomatic Classic Brass Torch has a durable, brass construction and an adjustable, pencil flame profile. This versatile, manual-ignition torch works best for basic projects including small diameter soldering and thawing frozen locks and pipes. For optimal performance, use upright. This torch is compatible with Bernzomatic Propane fuel, sold separately.

The Bernzomatic Outdoor Backyard Torch has a wide brush flame with an adjustable and self-extinguishing flame knob and hassle-free, trigger-start ignition. It is equipped with a foam-grip handle and a 36-inch arm, making it ideal for chemical-free yardwork such as burning weeds and brush, driveway repairs or lighting fire pits or smokers. This torch is compatible with Bernzomatic Propane fuel, sold separately.

Designed for precision work such as fine soldering, jewelry repairs, craft projects and heat shrinking wire, this torch is small but mighty.

Designed for precision work including fine soldering, jewelry repairs, craft projects and heat shrinking wire, the Cordless Soldering Iron for Hobby and Household Use features three interchangeable settings soldering tip, hot air blower and micro torch. A flame adjustment fine-tunes the precision flame, the electric ignition makes lighting easy and a continuous flame lock keeps the torch lit while in use.

With a 12” Right Angle Flex Shaft, DEWALT Bit Holders enable users to reach nearly any hard-to-reach space. A Rapid Load™ head enables fast, easy bit changes, and each fastener is supported by a magnet for accurate alignment. A side handle offers additional leverage and support.

Featuring tungsten carbide teeth for maximum durability and a thin kerf for fast, smooth cuts, DeWalt small diameter construction saw blades power through a variety of building materials with ease. Ribbed heat vents allow blades to run at cooler temperatures, reducing blade flexing and binding. Anti-stick coating minimizes friction and gum-up.

Accomplish a variety of applications on the job site with one system. The 4-in-1 System transforms to quickly switch between a Compact Right Angle, Standard Right Angle, Right Angle Flexible Shaft, and Straight Flexible Shaft. Withstand the power of today's impact drivers with the metal gearcase design and access tight spaces with its short 1.5-in height.

Powered by a high concentration of 100% virgin silicon carbide grain, DEWALT Type 27 Masonry Grinding Wheels deliver aggressive grinding action and smooth-running wheels. 3 full sheets of fiberglass help to increase durability and safety. A proprietary design ensures long wheel life.

DeWalt Impact Ready hole saws are ready to take on your toughest projects. An ejection spring offers easy plug removal, and a raised shoulder design helps to prevent breakthroughs.

Fine finish blades let trim crews get the most out of sliding or 'chop' style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing 'grabbing' or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and molding.

Ultra finish blades let trim crews get the most out of their sliding or chop-style miter saws, as well as table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing 'grabbing' or blowout. Flawless crosscuts in wood with minimal rework. Flawless finish in melamine and veneered plywood.

Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table and miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades or make quality crosscuts in solid wood or plywood. Great for chop and sliding style miter saws as well as table saws.

Diablo's general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table and miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades or make quality crosscuts in solid wood or plywood. Great for both sliding and 'chop' style miter saws as well as table saws.

Diablo's Medium Aluminum Cutting blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out. Laminated materials are highly abrasive, so these blades feature a TiCo carbide blend ideally suited to harsh service. Diablo's blade is ideal for 12 inch sliding miter saws and portable table saws.

Fine finish blades let trim crews get the most out of sliding or 'chop' style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing 'grabbing' or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and molding.

Diablo's 4-1/2 in. Cordless Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life - and frames more houses - than other framing blades.

Diablo's diamond cup wheels provide extreme durability, faster cuts and longer life in concrete grinding applications. These superior performing diamond cup wheels deliver up to 3X faster material removal versus standard diamond cup wheels. Optimized L-shaped diamonds segments and diamond distribution lead to constant diamond exposure for maximum performance in concrete grinding applications.

"Diablo's fine finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood and molding. (Blades ending in ""S"" are also ideal for radial arm saws)."

Diablo's framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB and hardboard siding with the smoothest, fastest and most accurate cut.

Diablo introduces Carbide Teeth Hole Saws, the first hole saws on the market to cut both wood and metal (wood, nail-embedded wood, plastic, aluminum, metal, cast iron, stainless steel and metal). Delivering up to 50X longer cutting life than bi-metal, these new carbide teeth hole saws offer faster cutting performance and increased productivity.

Diablo's new, high performance hole saws deliver faster cutting performance and increased productivity, Hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass and Variable Tooth Design for faster cuts.

Diablo's new, high performance hole saws deliver faster cutting performance and increased productivity, Hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass and Variable Tooth Design for faster cuts.

Diablo's new, high performance hole saws deliver faster cutting performance and increased productivity, Hole saw system and mandrel design simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass and Variable Tooth Design for faster cuts.

The Dremel EZ Lock makes accessory changes easy as Pull-Twist-Release. The one mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic. For use with the EZ402 EZ Lock Mandrel.