Camcorder Accessories

SmallRig Lightweight Top Plate for BMPCC 4K & 6K APT2510 firmly mounts to the camera using a 1/4"-20 screw and an anti-twist insertion to the strap hole on the left. It is an option for people who prefer to set up a lighter handheld rig or for better gimbal balance. The plate features a variety of mounting options including 1/4"-20 and 3/8"-16 holes, ARRI locating holes, two cold shoes and a built-in NATO rail, which makes it easy to attach accessories like a small microphone, 5 inches monitor, follow focus or SSD. The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available 15mm rod to add more accessories.Note:
49; Please make …

SmallRig Cold Shoe (2pcs Pack) 2060 could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block and plate etc. The counterbore hole in the center is attachable to a 1/4" screw, but the 1/4" screw will not touch the hot shoe contact of accessories mounted on the cold shoe. There comes with two secure bending bevels on the one end to prevent accidental removal. The arrowheads on the cold shoe show the direction to mount additional accessories.

7cm standard quick release safety NATO rail is part of our QR-Handles, and it can be attached to any two 1/4-20 holes via (2) 1/4"-20 screws (included) to provide mount for QR-Handles. It features spring loaded pins on both ends to prevent accidental removal. Compatible with our Slide Mount, also with RED Epic/Scarlet, Black Magic Camera and so on, and other third party accessories.

46mm standard quick release safety rail is part of our QR-Handles. The spring-loaded pin on each end of the rail prevents accidental accessory detachment. Compatible with our SlideMount, with RED Epic/Scarlet, Black Magic Camera and other third party accessories.

After experiencing the durable and sturdy Kondor Blue's Cold Shoe Receiver Plate in Space Gray, you'll understand why it's a top choice for photographers and videographers alike. This compact accessory, crafted from high-quality materials, is designed to withstand the rigors of daily use, making it a reliable addition to your camera setup. Despite its small footprint, this lightweight cold shoe plate packs a punch in terms of functionality. It's not just a simple accessory; it's a versatile tool that expands your shooting capabilities. Whether you're mounting lights, microphones, or other camera equipment, this plate ensures a secure fit atop your camera or camera rig. The Kondor Blue Cold Shoe …

While compact in size, the SmallRig Aluminum Alloy Pair of 15mm Rods (M12-4inch) 1049 delivers robust performance and versatility for your camera rig setup. Crafted from high-quality, durable aluminum alloy, these 15mm rods are designed to extend the functionality of your rig by accommodating a wide array of 15mm-compatible accessories. The M12 thread at both ends ensures seamless integration with your existing equipment, offering a sturdy and reliable connection. These rods are not only resilient against wear and tear, but they also resist caustic elements, ensuring long-lasting performance even in challenging shooting environments. Despite their strength, these black aluminum alloy rods are …

SmallRig Universal Cable Clamp BSC2333 is designed to hold cables in place and prevents cable strain when using cameras or monitors. The clamp is attached to the camera/monitor cage or any other accessories via a 1/4 -20 screw. It s compatible with cable diameter from 2-7mm thickness and support 2 cables of various thicknesses the same time without using tools, such as microphone cable, power cable, HDMI and SDI cable. The thumbscrew on each side features hex spanner hole so that you can use the hex spanner to re-tighten it. All the screws share the same hex spanner included in the package.

2pcs 15mm Black Aluminum Alloy Rod(M12-30cm) 12inch 1053 could be utilized for mounting various 15mm-compatible accessories to the camera rig with inner M12 thread at ends.The rods are made of highly reliable aluminum alloy, and they have good abradability and anti-causticity, but much brighter and stronger than the original industry standard rods.

When it comes to professional video support, the 15mm Black Aluminum Alloy Rod Pair with M12 Thread is a top-tier choice for filmmakers and videographers seeking durability and versatility. This set includes two pieces, each 8 inches (20cm) in length, crafted to meet the industry standard for 15mm support rods. Constructed from high-quality aluminum alloy, these rods boast exceptional sturdiness and resistance to wear, ensuring they maintain their integrity even under the rigors of frequent use. The material's anti-corrosive properties contribute to the rods' longevity, making them a reliable addition to any video support setup.Each rod features an M12 thread on both ends, allowing for seamless …

This is our SmallHD Monitor Anti-Twist Spacer Plate for the Kondor Blue Mini Quick-Release Plate. This monitor spacer is compatible with all SmallHD monitors featuring the locator pins and it will keep your accessories from twisting or unscrewing while on the job.Add this SmallHD Monitor Anti-Twist Spacer Plate to your Kondor Blue Mini Quick-Release Plate to prevent your accessory from twisting. The thin aluminum plate slides over the thread on the separately available quick release plate, allowing you to attach the monitor securely.

SmallRig Cold Shoe Extension 2879 is designed to hold accessories on the side of your rig when using cameras. The cold shoe mount maintains access to camera buttons after mounting a microphone or light. It secures to cages and plates with two captive 1/4"-20 screws to prevent it from losing. The cold shoe features a stopper edge in one end to prevent your accessory from suddenly sliding out.

SmallRig Mini Quick Release NATO Rail (48mm) 2172 is the thinnest NATO rail in the market. Fixed by 1/4"-20 screws to devices such as camera, monitor, wireless video transmitter or receiver, etc., it works with NATO clamps for quick attachment and release.It features safety pins on both ends to prevent accessories from accidentally sliding off. It is low profile so there is no need to remove it before putting your devices back into cases.

SmallRig 15mm Carbon Fiber Rod (4", pair) 1871 is a pair of 4 inch long non-threaded rods featuring a carbon fiber pattern on the outer surface, which is highly rigid, lightweight and corrosion resistant. This pair of rods are 100mm long machined from hollow carbon fiber tubes. It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more. If you need much longer carbon fiber rods

Are you looking to enhance your camera rig with a top handle that promises both comfort and functionality? The SmallRig Top Handle (1/4"-20 Screws) 1638C is expertly crafted to elevate your filming experience, offering a reliable and sturdy grip for low-angle shots and easing the strain on your arms during extended shoots.Constructed from high-quality, black anodized aluminum, this durable top handle is designed to withstand the rigors of both studio and field work. Its ergonomic design ensures a comfortable hold, allowing you to maneuver your camera with confidence and precision.The 1638C Top Handle is not just about comfort; it's a hub of versatility for your camera setup. It features a cold …

SmallRig Low-Profile NATO Rail 70mm BUN2483 is fixed to your camera rig by two 1/4"-20 screws. It is 70mm long, compatible with NATO accessories such as clamps, handles and monitor holders, enabling you to quick attach and release the rig components. The safety pins on both ends prevents accessories from accidentally sliding off.

What you're looking at is a versatile and high-quality baseplate with a dual 15mm rod clamp, designed to provide a sturdy and reliable platform for popular cameras such as the Sony FS7, Sony A7 series, Canon C100/C300/C500, and more. This low-profile baseplate is not only lightweight but also engineered to attach seamlessly to your camera using either a 3/8"-16 or 1/4"-20 screw. The baseplate is equipped with 15mm diameter rod holes, spaced 60mm apart, enabling you to conveniently mount a range of accessories like a follow focus, matte box, or lens support. It's specifically designed to maintain a low weight profile, allowing operators to utilize the FS7's inbuilt shoulder pad, thereby reducing …

SmallRig 15mm Single Rod Clamp for BMPCC 6K PRO Cage 3276 works with SmallRig cage 3270 to provide a perfect follow focus solution for BMPCC 6K PRO camera kit. Locked to the front of the cage via a 1/4''-20 screw and a locating pin, it can be fitted with a 15mm single rod and fixed via a thumb twist knob, allowing easy connection with such wireless focus motors as Nucleus Nano, PD MOVIE, REDROCK. The rod clamp does not interfere with other accessories like cable HDMI cable, SSD cable, etc.

SmallRig 15mm Carbon Fiber Rod (6", pair) 1872 is a pair of rigid, durable while lightweight rods that won't weigh down your camera support rig. This pair of rods are 150mm long machined from hollow carbon fiber tubes. It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more.

Mounting a follow focus can sometimes be a pain. This tiny little mount helps to fix that. It is a 1/4-20 mounting screw with a single Arri-mount anti-rotation pin. This makes mounting to the front of many camera cages super simple. Once mounted, screw on any compatible M12 screw (1.75mm thread pitch) to our 15mm rods.

SmallRig Super Lightweight 15mm-Railblock (2pcs Pack) 2061 includes 2pcs of super lightweight 15mm-Railblock. Each Super Lightweight 15mm-Railblock comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. The adjustment of one wingnut will not affect the operation of the other wingnut. In addition, it is equipped with an abundance of 1/4" threaded holes for DIY operations.

Because your creative endeavors demand equipment that is both resilient and adaptable, the 15mm Carbon Fiber Rod set, measuring 8 inches each and available in a 2-pack, is the quintessential choice for photographers and videographers alike. Crafted from premium carbon fiber, these rods boast a sleek, non-reflective matte finish, a thoughtful redesign inspired by user feedback to eliminate unwanted glare and reflections during shoots.The rods' lightweight yet robust construction ensures they are not only easy to handle but also incredibly rigid, providing reliable support for your camera or other equipment without adding unnecessary weight to your rig. This makes them an ideal alternative to …

SmallRig HDMI&USB-C Cable Clamp for BMPCC 6K PRO 3271 works only with the new cage 3270. It locks onto the left side of the cage via two thumbscrews to secure HDMI and USB-C cables and prevent signal interruptions during filming. Besides, it comes with a hex spanner to help ensure secondary fixation.Note: Please use a spanner to refix the screw for safety.

SmallRig T5 SSD Cable Clamp for BMPCC 6K Pro 3300 can be fixed via one thumb screw to protect SSD USB-C cable and prevent disconnection during shooting. The clamp is compact, space-saving and easy to carry around.

SmallRig 90 Degree 15mm Rod Clamp (DIY) 2069 is specifically designed for 15mm rods. It could provide more DIY mounting possibilities based on your needs during shooting. It features quick attachment and release.SmallRig 90 Degree 15mm Rod Clamp 2069 are used to attach 15mm rods for different shooting scenarios. It could be locked tight via 2 wingnuts. It could attach 15mm rod and then 15mm Micro Rod (1.5") with 1/4" Thread 1552 for monitor. It features quick attachment and release during this process. It could attach 15mm rod of dual-rod system for run-and-gun operation. It could be mounted on 15mm Rod with 1/4 Inch Screw Hole 1182 for magic arm whereby monitor could be attached. It could attach …