Comparison Philips Series 5000 HC5630 vs Philips Series 3000 HC3510

Clippers and trimmers are often equipped with fixed-height removable combs. The more combs in the kit, the smoother transitions the device can make. The standard set usually includes 3-5 combs, more advanced models may have 7-10 combs of a fixed height in a set.

The cutting height is influenced by the type of cutting element and the inclusion of detachable combs. Toothed blades can trim hair as short as 1 mm. By coupling a toothed blade with a detachable comb, the cutting height can range from 2-3 to 20, and even 30 mm – the precise height hinges on the provided comb attachments. There are defined minimum and maximum cutting heights. The minimum pertains to the blade's inherent capabilities, devoid of attachments. The maximum cutting height is determined by the detachable comb type.

The number of haircut length options provided in the design of the clipper or the design of the nozzle. The more such options, the more versatile the clipper and the more cutting options it provides.

The device's range of adjustable speeds is noteworthy. While most clippers typically operate at a single standard speed, there are models with dual speeds, often referred to as turbo. More advanced variations have been developed by certain manufacturers, featuring 3, 4, or even more speeds. Clippers equipped with variable speeds are designed to effectively manage denser hair by increasing the motor's revolutions.

— Self- sharpening blades. Blades made using a special technology, thanks to which they sharpen themselves, due to friction against each other in the process. Thus, the blades remain sharp at all times, and their maintenance is limited to the replacement of worn blades.

— Function of thinning. Thinning in hairdressing is called cutting the ends of the hair at different levels — as a result, after the haircut, the hairstyle looks more natural and magnificent. In machines, special thinning nozzles are usually used for this.

— Wet cleaning. The clipper's capacity for wet cleaning of its attachments, allowing them to be rinsed under flowing water, is a notable feature. It's important to clarify that this pertains exclusively to the attachments – not all models with wet cleaning have waterproof casings (see below). Nevertheless, even without a waterproof casing, it might still be feasible to clean the attachments without detaching them from the device. In general, wet cleaning is frequently more efficient, quicker, and precise compared to dry cleaning.

— Waterproof body.In this context, a sealed enclosure is indicated, enabling the machine to withstand water exposure without adverse effects. The extent of protection can vary; certain models tolerate brief water immersion, while others can operate even when submerged. These specifics should be detai...led in the accompanying instructions. Nevertheless, for clippers used in environments with elevated humidity (like bathrooms or wet areas), having such a water-resistant enclosure is greatly preferred, and sometimes obligatory.

— Built-in vacuum cleaner. The clipper is equipped with a vacuum cleaner, which greatly facilitates cleaning after cutting. The suction hole located under the blades sucks most of the cut hair into a separate reservoir. Of course, there will not be a 100% return, but there will be much less hair scattered on the floor. However, when cutting a beard, a vacuum cleaner will do just fine.

— Laser pointer. The presence in the electric razor of a laser in the form of a straight line. With its help, you can easily, and most importantly, evenly and symmetrically trim the desired areas.

— Mains. The clipper is powered by a 230 V electrical network. The benefit of this power source is the unrestricted operational duration (no need for periodic battery recharging). However, drawbacks include the necessity of an available electrical outlet and the limitation imposed by a power cord, which can impede movement and cause operational inconvenience.

— Battery. The clipper is powered by its own built-in battery. On the one hand, this gives maximum freedom of movement (since there is no power cord) and battery life — such devices can be used even where there is no electrical network. On the other hand, the battery life is limited, it must be constantly recharged — otherwise there is a risk that the charge is exhausted at the most inopportune moment (for example, during the haircut).

— Batteries. The clipper is powered by interchangeable batteries. In terms of its primary pros and cons, this power source resembles battery power (as mentioned earlier). However, in contrast to built-in batteries, replaceable batteries offer less capacity, making them suitable for low-power devices like nose trimmers (see Type) that don't demand prolonged usage. On the positive side, replaceable batteries allow for swift replacement when depleted, whereas a built-in battery would necessitate a lengthier recharging process in such instances.

The typical duration of uninterrupted operation for a clipper powered by a self-contained source (battery or rechargeable batteries, refer to Power Source) without requiring a recharge or battery replacement. Extended continuous operation time becomes particularly crucial when intending to use the clipper in locations where recharging or battery changes are unavailable, such as during long trips.

Time to fully (from 0 to 100%) charge the battery of the clipper. For rare cases of using the model, charging time is not so relevant, but for everyday use it is better to choose fast charging clippers.

— Scissors. The inclusion of a set of scissors with the hair clipper enhances its value, catering to both experienced enthusiasts and professional hairdressers. This bundled option provides a comprehensive haircutting package, and the scissors serve as a valuable tool for addressing finer details that the clipper may not handle alone.

— Comb. Availability in a set of delivery of the clipper of a comb. A comb is one of the most necessary tools for a hairdresser, so when purchasing it together with a typewriter, the user gets rid of the need for a separate purchase.

— Charging stand. The stand serves a dual purpose as a charger and storage unit for the machine. It facilitates convenient recharging during quick intervals between cutting sessions, making it ideal for hairdressers to keep the machine on the stand while using scissors or other tools. Additionally, it can double as an accessory stand (see Stand for accessories).

— Stand for accessories.The stand is designed to store clipper accessories such as detachable nozzles, cleaning brushes, and oilers. Using this dedicated stand reduces the chances of losing any of these accessories. In cordless clippers, this role is frequently fulfilled by the charging stand, which also serves as a storage solution (refer to Charging Stand).

— Case. Cases include all kinds of rigid structures for storing the clipper. Cases in the form of handbags made of thick fabric also fall into this category. In addition to reliable storage of the device, they also elevate the model to the highest class. In low-cost clippers, a much more primitive fabric cover is included in the package.