USA
Catalog   /   Small Appliances   /   Kitchen   /   Electric Kettles

Comparison Xiaomi Electric Glass Kettle 2200 W 1.7 L stainless steel vs Xiaomi Mi Smart Kettle Pro 1800 W 1.5 L white

Add to comparison
Xiaomi Electric Glass Kettle 2200 W 1.7 L  stainless steel
Xiaomi Mi Smart Kettle Pro 1800 W 1.5 L  white
Xiaomi Electric Glass Kettle 2200 W 1.7 L stainless steelXiaomi Mi Smart Kettle Pro 1800 W 1.5 L white
from $41.00 
Expecting restock
from $63.70 
Expecting restock
TOP sellers
Main
Strix thermostat controller. 3-level security system. Display. Thermometer. Long-term heat retention. Smartphone control.
TypeElectric KettleElectric Kettle
Designhigh tech
Volume1.7 L1.5 L
Technical specs
Power consumption2200 W1800 W
Heating elementhiddenhidden
Coating of the heating elementstainless steelstainless steel
Water level indicator+is absent
Thermostat
 /in mobile application/
Temperature adjustment40 – 100 °C
Maintaining t° (kettle)
 /12 hours/
Thermometer
Opening the lid with a button
Control via smartphone
General
Body shapecylindricalcylindrical
Double-walled
Display
ControllerStrix
Backlight
Materialglassplastic
Cable length0.7 m
Dimensions24.3х22.1х14.2 cm20x15x24 cm
Weight1.1 kg1.3 kg
Color
Added to E-Catalogjuly 2023february 2021

Design

The design in which the electric kettle is decorated. In addition to the classic design, nowadays there are more original styles, namely:

Retro. Devices stylized antique — mainly for kitchen utensils of the 30s — 50s of the XX century. The degree of stylization in this case can be different: for example, some appliances are not different from ordinary kitchen kettles that are placed on the stove. Also note that almost all samovars are performed in retro style (see "Type"). But thermopots and teapots in this design are almost never produced. Anyway, a retro kettle will be indispensable for a kitchen in the same style, but it can also fit into a modern interior.

Hi-tech. The devices that have a technological, sometimes even futuristic design — using unpainted metal, transparent glass, as well as a minimal amount (or even complete absence) of decorative details. At the same time, the design can be quite unusual: for example, there are models that taper upward and vaguely resemble laboratory flasks. Like the retro style, almost no other devices are produced in this style other than classic kettles.

When choosing a device in a specific design, note that the design inevitably affects the cost — sometimes quite noticeably, despite the fact that it usually does not provide functional advantages.

Volume

The nominal capacity of a kettle refers to the maximum amount of water that can be safely poured into it, and it is typically indicated by the water level indicator. In the case of brewing sets (see "Type"), the nominal capacity refers to the main kettle, while the capacity of the teapot is listed separately (see below).

The capacity of the electric kettle directly affects the amount of water that can be heated at once. A larger capacity allows for heating more water, but this also means the kettle will be larger and heavier. Additionally, heating a larger volume of water requires either more power or a longer time. Therefore, it is important to consider one's actual needs when choosing a kettle based on its capacity. For example, mini-kettles for travelling (or for one person) have a volume of up to 1 liter. For home use in a family of 2 – 3 people, a 1,5 – 2 liter model is enough. Devices for 2 – 3 liters are already well suited for a small office or a similar situation. The most spacious electric kettles are designed to hold 10 liters or more, and are typically used in public places such as canteens and cafes for dispensing hot water.

Power consumption

The power consumed by the kettle during operation is actually the power of the heating element installed in the device.

Two working moments depend on this parameter: heating intensity and electricity consumption. On the one hand, the high power of the heater allows you to quickly heat up a certain volume of water and saves time. On the other hand, the power consumption of such a device will also be appropriate. The wattage of a kettle's heater typically does not have a significant impact on electricity bills since the energy consumption required to heat a given volume of water remains the same regardless of the heater's power rating. However, there may be certain issues related to electrical connectivity. For example, if the wiring is weak or the fuses are improperly sized, the operation of a high-power heater may cause power outages. Additionally, devices with a power rating greater than 3500 W cannot be connected to a regular electrical outlet and require a specific power format. Consequently, even the largest thermal pots, which typically have a capacity of 10 L or more, are rarely equipped with heaters more powerful than 3000 W, since this power rating is sufficient for their intended use and can be connected to a standard electrical outlet.

Water level indicator

A device that allows you to estimate the amount of water in the kettle without opening its lid. Most often the water level indicator has the form of a scale applied either to the transparent wall of the container, or to a transparent insert in an opaque wall. In any case, this function allows you to measure the volume of filled water quite accurately, and not just determine it “by eye”. This possibility is especially important for models with open coils (see "Heating element"), in such devices, a mark on the indicator is usually applied to the minimum allowable water level.

Thermostat

A device that allows you to set the temperature to which the water will be heated — the thermostat monitors the temperature and automatically turns off the heating when the desired value is reached. In fact, water heated in a kettle does not always need to be boiled: for example, for brewing some types of tea, the optimum temperature is about 80 °C, and for preparing baby food — 60 °C. Thermopot are most often equipped with a thermostat, but there are also classic electric kettles with such a function.

Temperature adjustment

The temperature adjustment capabilities refer to the specific temperature values that can be programmed into the electric kettle. It's important to note that this refers to automatic adjustment, where the kettle turns off or switches to temperature maintenance mode once the desired temperature has been reached.

If this paragraph contains several options separated by commas (for example, “60 °С, 80 °С, 90 °С”), this means that this model has several fixed temperature options. However, there are also devices with smooth adjustment, which allows you to adjust the temperature in steps of 5 °C, or even 1 °C; for such devices, the entire adjustment range is indicated here, for example, "60 — 100 °C".

The greater the number of temperature setting options available in an electric kettle, the more versatile it becomes, allowing for precise selection of the optimal brewing mode for various types of drinks. Here is a simple table of recommended temperatures:

white tea — 60 °C;
yellow tea -70 °C;
green tea — 80 °C;
black tea — 90 °C;
— rooibos, hibiscus — 100 °C (up to boiling);
baby food — 40 °C.

Of course, there are exceptions to such rules — depending on the specific type of drink. For example, some...varieties of green tea can be brewed at 90 °C.

Maintaining t° (kettle)

The ability to operate a classic kettle (see "Type") in the mode of maintaining the water temperature — when the heated water is kept hot due to the operation of the heater at low power. For kettles, unlike thermopots, this mode is far from necessary, so its presence is indicated separately in the specs.

Thermometer

A device that displays the temperature of the water in the kettle. The presence of a thermometer is useful if the water needs to be heated to a certain temperature. However, the thermometer does not automatically turn off the kettle, unlike a thermostat — this must be done manually. Also, the thermometer allows you to assess how much the heated water has cooled over time and whether it can be used without heating again.

Control via smartphone

The ability to remotely control the kettle from a smartphone, tablet or other similar gadget with a special application installed. The connection can be made via Wi-Fi or Bluetooth.

This feature does not only allow you to control the device from a distance, but often gives you more options than the classic control method. For example, special "chips" like a timer or thermostat can only be accessed through the application. In addition, the information about the operation of the kettle is transmitted to the application — for example, thermometer data, status (on/off), etc. Due to plenty of features, models controlled from a smartphone are often called “smart kettles”. Their main disadvantage is their high cost.
Xiaomi Electric Glass Kettle often compared
Xiaomi Mi Smart Kettle Pro often compared