Ashburn
Catalog   /   Tools & Gardening   /   Garden Power Tools   /   Garden Sprinklers

Comparison Yato YT-8985 vs Intertool GE-0051

Add to comparison
Yato YT-8985
Intertool GE-0051
Yato YT-8985Intertool GE-0051
from $8.19 
Outdated Product
from $2.36 up to $2.60
Outdated Product
TOP sellers
Typeimpulseimpulse
Installationstickstick
Spraying angle (°)45 - 360 °
Irrigation angle adjustment
Сoverage distance12 m12 m
Max. coverage area452 m²452 m²
Additional output
Hose diameter1/2"
Materialmetal / plastic
plastic /ABS, polypropylene/
Added to E-Catalognovember 2016april 2016

Spraying angle (°)

The irrigation angle provided by the sprinkler during operation, in other words, the size of the horizontal circular sector in which the device operates. For angle-adjustable sprinklers (see below), this item indicates the maximum value or the range of values from minimum to maximum (more often the former, since manufacturers rarely give a specific range).

Most modern models are able to cover a full circle — they indicate an angle of 360 °. However, pivot irrigation is not always required. In such situations, there are two options: either use a model with adjustable angle, or choose a sprinkler with a narrower irrigation angle. The advantages of the first option are described below, and the second, usually, is cheaper, and the sprinkler itself is more reliable due to its simplicity.

Hose diameter

The diameter of the hose (or pipeline) that the sprinkler is designed to connect to, in other words, the diameter of the mounting thread provided in the device. This parameter allows you to determine compatibility with a specific hose: if the mounting diameters do not match, you will not be able to connect the sprinkler directly, you will need an adapter.

Hose diameters are traditionally indicated in inches — for example, 3/4" or 1.5".

Material

The main material used in the construction of the sprinkler.

Plastic. The key advantages of plastic are its low cost and ease of processing, making it well suited for complex shaped parts. In addition, this material is lightweight and completely corrosion resistant. On the other hand, plastic is less durable and reliable than metal, and is less suitable for rubbing and other parts in contact with each other. However, in the case of sprinklers, this moment is not critical, and most modern models are made of plastic.

Metal. Metal favorably differs from plastic in higher strength and, theoretically, durability. On the other hand, it weighs more and is much more expensive; in addition, water-resistant alloys and/or coatings must be used in sprinklers, which further increases the cost. Therefore, this material is used relatively rarely — mainly in fairly advanced models of the impulse type(see above).

— Metal / plastic. A combination of the two materials described above: usually, the most critical elements are made of metal, while the rest of the device uses plastic. This design allows you to combine the advantages of both materials and partially compensate for their shortcomings: metal-plastic sprinklers are not as expensive and heavy as all-metal ones, and at the same time more durable and reliable than plastic ones. This option is very popul...ar, especially in models of the middle and upper classes.
Intertool GE-0051 often compared